where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
654 views
Technical Discussions
Hanurajie Baskan
Teacher, NDT Instructor
National Nuclear Energy Agency, Japan, Joined Oct 1999, 1

Hanurajie Baskan

Teacher, NDT Instructor
National Nuclear Energy Agency,
Japan,
Joined Oct 1999
1
08:44 Mar-13-2003
UT for thin material

Dear Everybody,
I'd like to ask to ndt forum about my new specimen TiNi (as actuator). What kind NDT method should I use for this one?. The thickness is 130 micro after rolling. Is there probability by ultrasonic, what kind method of UT?. I was trying by UT immersion 35 MHz focus tranducer, but really unsatisfied. Is there anybody can suggest to me.
Thank you in advance.
Best regard

Baskan


 
 Reply 
 
Kris Van de Rostyne
Kris Van de Rostyne
09:17 Mar-13-2003
Re: UT for thin material
Hello,
One possible solution to increase the bandwidth could be to use laser-ultrasonics. In this method, the ultrasonic waves are generated by the thermo-elastic expansion caused by the absorption of an incident laser pulse. The shorter the pulse-duration, the higher the bandwidth and resolution (but unfortunately, the higher the price I am afraid). For your application, a laser producing pulses of a few nanoseconds (e.g. Nd:YAG) should probably be convenient. Do you want to use UT for defect detection or for characterisation of properties?
Greetings,
Kris

: Dear Everybody,
: I'd like to ask to ndt forum about my new specimen TiNi (as actuator). What kind NDT method should I use for this one?. The thickness is 130 micro after rolling. Is there probability by ultrasonic, what kind method of UT?. I was trying by UT immersion 35 MHz focus tranducer, but really unsatisfied. Is there anybody can suggest to me.
: Thank you in advance.
: Best regard
.
: Baskan
.



 
 Reply 
 
C. Valdecantos
Engineering
MTORRES, Ing., Spain, Joined May 2001, 9

C. Valdecantos

Engineering
MTORRES, Ing.,
Spain,
Joined May 2001
9
01:56 Mar-13-2003
Re: UT for thin material
Depending on what are you looking for, some other ndt technique may be of use. For example, if the problem is to measure the thickness, Eddy Current may be the best, although this (Ti base?) alloy will probably show a very low conductivity. EC will also provide information (or even positive indication) on other parameters like cracks, inhomogeneities, laminar defects.

If EC is not suitable, perhaps thermografic analysis would be of use. In this case, the (supposed)low thermal conductivity of the material will help.


 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window