where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
558 views
Technical Discussions
JACKY CHEN
Engineering
Taiwan, Province of China, Joined Aug 2002, 5

JACKY CHEN

Engineering
Taiwan, Province of China,
Joined Aug 2002
5
06:08 Mar-24-2003
EXTREME VALUE STATISTIC

Dear all:

Can anybody tell me what is the "Extreme Value Statistic" means? Also, could anybody tell me where I can get sone information about the "Extreme Value Statictics"?


 
 Reply 
 
Kris Van de Rostyne
Kris Van de Rostyne
06:49 Mar-24-2003
Re: EXTREME VALUE STATISTIC
: Dear all:
.
: Can anybody tell me what is the "Extreme Value Statistic" means? Also, could anybody tell me where I can get sone information about the "Extreme Value Statictics"?
.
Hello,
Extreme value statistics is used in NDT to describe the statistical behavior of local corrosion phenomena like e.g. pitting corrosion. E.g. Leaking of a container will result as soon as ONE ('extreme') pit is as large as the container wall thickness. To predict a maximum expected pit depth from a limited set of measurements, extreme value calculations are required. Care should be taken when sampling the data.
Details can be found in:
*”Introduction to life prediction of industrial plant materials: Application of the extreme value statistical method for corrosion analysis”, editor M. Kowaka, Allerton Press Inc., 1994
*”Extremes: Statistical Theory and Applications in Science, Engineering and Economics”, Editor-in-Chief: H. Rootzén, Kluwer, 1999

Hope this helps,

Kris




 
 Reply 
 
F.Mustapha
F.Mustapha
00:27 Apr-21-2005
Re: EXTREME VALUE STATISTIC
: : Dear all:
: .
: : Can anybody tell me what is the "Extreme Value Statistic" means? Also, could anybody tell me where I can get sone information about the "Extreme Value Statictics"?
: .
: Hello,
: Extreme value statistics is used in NDT to describe the statistical behavior of local corrosion phenomena like e.g. pitting corrosion. E.g. Leaking of a container will result as soon as ONE ('extreme') pit is as large as the container wall thickness. To predict a maximum expected pit depth from a limited set of measurements, extreme value calculations are required. Care should be taken when sampling the data.
: Details can be found in:
: *”Introduction to life prediction of industrial plant materials: Application of the extreme value statistical method for corrosion analysis”, editor M. Kowaka, Allerton Press Inc., 1994
: *”Extremes: Statistical Theory and Applications in Science, Engineering and Economics”, Editor-in-Chief: H. Rootzén, Kluwer, 1999
.
: Hope this helps,
.
: Kris
.

Principle Component Analysis (PCA) is one of EVS methods that have the capability to reduce dimension in vectorial form of data. Try any search engine to get this definition or if you're in doubt you can contact me and i'll send few journals paper that relates with this statistical approaches.

cheers



 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window