where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
521 views
Technical Discussions
Richard Finlayson
Richard Finlayson
04:34 Jan-05-1999
Cost Benefits/Economics of NDT

I need to find information on cost benefits of NDT. I have to sell NDT inspections as cost effective and benficial inspections. The party that I must convince are not experts in NDT and are only interested in the bottom line savings. They would like to see dollars saved. I am looking for any resourses that would give me this information.
Thanks for your help.


 
 Reply 
 
John McCanna
John McCanna
02:05 Jan-06-1999
Re: Cost Benefits/Economics of NDT
: I need to find information on cost benefits of NDT. I have to sell NDT inspections as cost effective and benficial inspections. The party that I must convince are not experts in NDT and are only interested in the bottom line savings. They would like to see dollars saved. I am looking for any resourses that would give me this information.
: Thanks for your help.

Dear Rick

I have utilized information contained in articles such
as:
"EQUIPMENT INTEGRITY INSPECTIONS ESSENTIAL TO RISK MANAGEMENT"
BY Helmut Thielsch & Florence Cone. CSNDT Journal Vol.-17, No.6 NOV?DEC 1996; and
"A COST OF QUALITY: THREE FINANCIAL METHODS FOR MAKING INSPECTION DECISIONS"
ASNT Materials Evaluation.

They worked for me. Good Luck.

John




 
 Reply 
 
Tom Murphy
NDT Inspector
USA, Joined Jul 2000, 16

Tom Murphy

NDT Inspector
USA,
Joined Jul 2000
16
03:24 Feb-23-1999
Re: Cost Benefits/Economics of NDT
: : I need to find information on cost benefits of NDT. I have to sell NDT inspections as cost effective and benficial inspections. The party that I must convince are not experts in NDT and are only interested in the bottom line savings. They would like to see dollars saved. I am looking for any resourses that would give me this information.
: : Thanks for your help.

: Dear Rick

: I have utilized information contained in articles such
: as:
: "EQUIPMENT INTEGRITY INSPECTIONS ESSENTIAL TO RISK MANAGEMENT"
: BY Helmut Thielsch & Florence Cone. CSNDT Journal Vol.-17, No.6 NOV?DEC 1996; and
: "A COST OF QUALITY: THREE FINANCIAL METHODS FOR MAKING INSPECTION DECISIONS"
: ASNT Materials Evaluation.

: They worked for me. Good Luck.

: John

Hello,

I took a short course called NDT in the Quality
Hierarchy of ISO, TQM and SPC. It contained a good
deal of the outlining process of justification of
NDE/NDT from and economics basis.

The instructor was Emmanuel Papadakis, andthe course
took place at the 1998 fall conference in Nashville.
I don't have his business card, but perhaps you could
contact ASNT (they sponsored the course) for further
info.



 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window