where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Eddyfi
Eddyfi Technologies provide the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivit ...
1378 views
Technical Discussions
Kris Van de Rostyne
Kris Van de Rostyne
06:30 Mar-28-2003
line driver

Hello,
Some piezoelectric ultrasonic sensors seem to include a so-called 'line-drive transformer'. Can anybody inform me about the function or usefulness of this component, or where I could find more information?
Thanks in advance,
Kris



 
 Reply 
 
Paul Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
03:09 Mar-28-2003
Re: line driver
Hi Kris,
A piezoelectric transducer generates an electric charge when it receives an acoustic signal. If the transducer is connected to a long coax cable, the charge is distributed over the cable capacitance, reducing the signal amplitude. The "line driver" that I know is an amplifier with a high ipedance input that is able to generate a much larger signal so that the amplitude is sufficient at the far end of the cable. These are normally used when the cable between the transducer and the instrument is very long (10s of meters)
Also, a transformer may be used to match the impedance of the transducer to that of the cable or instrument but I believe you refer to the device described above.
Paul

: Hello,
: Some piezoelectric ultrasonic sensors seem to include a so-called 'line-drive transformer'. Can anybody inform me about the function or usefulness of this component, or where I could find more information?
: Thanks in advance,
: Kris
.



 
 Reply 
 
Uli Mletzko
R & D, Retired
Germany, Joined Nov 1998, 89

Uli Mletzko

R & D, Retired
Germany,
Joined Nov 1998
89
05:56 Mar-30-2003
Re: line driver
: Hello,
: Some piezoelectric ultrasonic sensors seem to include a so-called 'line-drive transformer'. Can anybody inform me about the function or usefulness of this component, or where I could find more information?
: Thanks in advance,
: Kris

Hallo Kris,

a transformer, which is integrated into the housing of a piezoelectric sensor, is acting as a matching network.
It is matching the 'wave resistance' Z of the coaxial cable (e.g. Z = 50 Ohm for cable RG 58) to the complex input impedance (impuls) respective output impedance (echo).
Unfortunately, these two impedances (for input resp. output) might be different, so one has to make a compromise for the matching network.

For details, google for 'high frequency transmission lines', 'impedance matching', 'wave restistance', 'standing wave ratio'. Most of this is related to radio or tv engineering or to rf measuring techniques.

Regards Uli Mletzko
MPA NDT Group,
University of Stuttgart,
Germany


 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
04:53 Apr-03-2003
Re: line driver
Hi Kris,

A transformer is one option but when it comes to
maintaining the best possible signal-to-noise ratio it
is better to place some of the electronics near the
transducer. In a pulsed application this would be a
pre-amplifier, a T/R switch and maybe even the pulser.

Reason for this is that while a transformer can match
impedances it cannot prevent losses due to the non-
resistive nature of the transducer, at least not in
a short-pulse (wideband) application.

Greetings (groetjes),

Joerg.

: Hello,
: Some piezoelectric ultrasonic sensors seem to include a so-called 'line-drive transformer'. Can anybody inform me about the function or usefulness of this component, or where I could find more information?
: Thanks in advance,
: Kris
.



 
 Reply 
 
jayaraman
jayaraman
09:13 Oct-08-2003
Re: impedance transformation in hf radio frequency lines
: : Hello,
Will somebody enlighten me on exponential transformation of impedance in rf feeder lines especially in the context of short wave line transmission?
jayaraman
: Hallo Kris,
.
: a transformer, which is integrated into the housing of a piezoelectric sensor, is acting as a matching network.
: It is matching the 'wave resistance' Z of the coaxial cable (e.g. Z = 50 Ohm for cable RG 58) to the complex input impedance (impuls) respective output impedance (echo).
: Unfortunately, these two impedances (for input resp. output) might be different, so one has to make a compromise for the matching network.
.
: For details, google for 'high frequency transmission lines', 'impedance matching', 'wave restistance', 'standing wave ratio'. Most of this is related to radio or tv engineering or to rf measuring techniques.
.
: Regards Uli Mletzko
: MPA NDT Group,
: University of Stuttgart,
: Germany
.



 
 Reply 
 

Product Spotlight

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window