where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology
1420 views
Technical Discussions
Kris Van de Rostyne
Kris Van de Rostyne
06:30 Mar-28-2003
line driver

Hello,
Some piezoelectric ultrasonic sensors seem to include a so-called 'line-drive transformer'. Can anybody inform me about the function or usefulness of this component, or where I could find more information?
Thanks in advance,
Kris



 
 Reply 
 
Paul Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
03:09 Mar-28-2003
Re: line driver
Hi Kris,
A piezoelectric transducer generates an electric charge when it receives an acoustic signal. If the transducer is connected to a long coax cable, the charge is distributed over the cable capacitance, reducing the signal amplitude. The "line driver" that I know is an amplifier with a high ipedance input that is able to generate a much larger signal so that the amplitude is sufficient at the far end of the cable. These are normally used when the cable between the transducer and the instrument is very long (10s of meters)
Also, a transformer may be used to match the impedance of the transducer to that of the cable or instrument but I believe you refer to the device described above.
Paul

: Hello,
: Some piezoelectric ultrasonic sensors seem to include a so-called 'line-drive transformer'. Can anybody inform me about the function or usefulness of this component, or where I could find more information?
: Thanks in advance,
: Kris
.



 
 Reply 
 
Uli Mletzko
R & D, Retired
Germany, Joined Nov 1998, 89

Uli Mletzko

R & D, Retired
Germany,
Joined Nov 1998
89
05:56 Mar-30-2003
Re: line driver
: Hello,
: Some piezoelectric ultrasonic sensors seem to include a so-called 'line-drive transformer'. Can anybody inform me about the function or usefulness of this component, or where I could find more information?
: Thanks in advance,
: Kris

Hallo Kris,

a transformer, which is integrated into the housing of a piezoelectric sensor, is acting as a matching network.
It is matching the 'wave resistance' Z of the coaxial cable (e.g. Z = 50 Ohm for cable RG 58) to the complex input impedance (impuls) respective output impedance (echo).
Unfortunately, these two impedances (for input resp. output) might be different, so one has to make a compromise for the matching network.

For details, google for 'high frequency transmission lines', 'impedance matching', 'wave restistance', 'standing wave ratio'. Most of this is related to radio or tv engineering or to rf measuring techniques.

Regards Uli Mletzko
MPA NDT Group,
University of Stuttgart,
Germany


 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
04:53 Apr-03-2003
Re: line driver
Hi Kris,

A transformer is one option but when it comes to
maintaining the best possible signal-to-noise ratio it
is better to place some of the electronics near the
transducer. In a pulsed application this would be a
pre-amplifier, a T/R switch and maybe even the pulser.

Reason for this is that while a transformer can match
impedances it cannot prevent losses due to the non-
resistive nature of the transducer, at least not in
a short-pulse (wideband) application.

Greetings (groetjes),

Joerg.

: Hello,
: Some piezoelectric ultrasonic sensors seem to include a so-called 'line-drive transformer'. Can anybody inform me about the function or usefulness of this component, or where I could find more information?
: Thanks in advance,
: Kris
.



 
 Reply 
 
jayaraman
jayaraman
09:13 Oct-08-2003
Re: impedance transformation in hf radio frequency lines
: : Hello,
Will somebody enlighten me on exponential transformation of impedance in rf feeder lines especially in the context of short wave line transmission?
jayaraman
: Hallo Kris,
.
: a transformer, which is integrated into the housing of a piezoelectric sensor, is acting as a matching network.
: It is matching the 'wave resistance' Z of the coaxial cable (e.g. Z = 50 Ohm for cable RG 58) to the complex input impedance (impuls) respective output impedance (echo).
: Unfortunately, these two impedances (for input resp. output) might be different, so one has to make a compromise for the matching network.
.
: For details, google for 'high frequency transmission lines', 'impedance matching', 'wave restistance', 'standing wave ratio'. Most of this is related to radio or tv engineering or to rf measuring techniques.
.
: Regards Uli Mletzko
: MPA NDT Group,
: University of Stuttgart,
: Germany
.



 
 Reply 
 

Product Spotlight

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

On-Demand Webinar: Advanced Ultrasonic Techniques for HTHA Detection & Assessment

In the Oil and Gas industry, High Temperature Hydrogen Attack (HTHA) can occur in steels operating a
...
t high temperature, usually above 205°C (400°F). Early stages of HTHA are very difficult to detect. Join us for a webinar presented by Guy Maes, Zetec Sales Engineer Director. The webinar will demonstrate how advanced ultrasonic techniques are deployed for efficient and reliable HTHA inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window