where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

545 views
Technical Discussions
Alexander van der Werf
Alexander van der Werf
01:43 Mar-27-2003
penetrant onderzoek van grote hoeveelheid, kleine onderdelen.

Wie heeft er een oplossing voor om op korte termijn een grote hoeveelheid, kleine onderdelen penetrant te onderzoeken?

"Can someone inform me who has a solution to test a large quantity, small parts through penetration at short notice?"


 
 Reply 
 
Ingolf Hertlin
Ingolf Hertlin
09:45 Mar-28-2003
Re: penetrant onderzoek van grote hoeveelheid, kleine onderdelen.
: Wie heeft er een oplossing voor om op korte termijn een grote hoeveelheid, kleine onderdelen penetrant te onderzoeken?
.
: "Can someone inform me who has a solution to test a large quantity, small parts through penetration at short notice?"
.
Could you specify the type of the parts in more detail and the aim of the testing? That would be helpful to suggest a method.
Rather often acoustic resonance testing (ART) which is a volume oriented methof can be used alternatively to surface oriented methods, but this depends on the parts. If applicable cost effective testing of high volumes is no problem. We have very good experience with this and are able to find even very small defects. If needed we can send you a description and application examples. Please contact me: I.Hertlin@rte.de
Best regards
Ingolf Hertlin


 
 Reply 
 
Franc Buijsen
Franc Buijsen
08:04 Apr-03-2003
Re: penetrant onderzoek van grote hoeveelheid, kleine onderdelen.
: Wie heeft er een oplossing voor om op korte termijn een grote hoeveelheid, kleine onderdelen penetrant te onderzoeken?
.
: "Can someone inform me who has a solution to test a large quantity, small parts through penetration at short notice?"
.
Wij hebben mogelijk een oplossing voor het penetrant onderzoek. Gaarne contact opnemen voor meer details:
+31 654357929

mvg

Franc Buijsen




 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window