where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

438 views
Technical Discussions
Tino Volpe
Tino Volpe
01:34 Jan-06-1999
Surface roughness measurements

Hi everyone. I'm sorry that this is not related to this month's articles but I have a request. I am doing a study on the machinability of platinum and in order to quantify my results, I need to measure surface roughness. Does anyone know where I can rent an instrument for a short period of time to do this? I would appreciate any leads.

Thanks

Tino


 
 Reply 
 
Mark C. Malburg
Mark C. Malburg
03:36 Jan-07-2000
Re: Surface roughness measurements
EMI Gage
847-277-7511

Ask for Jeff, tell him I sent you!

- Mark

: Hi everyone. I'm sorry that this is not related to this month's articles but I have a request. I am doing a study on the machinability of platinum and in order to quantify my results, I need to measure surface roughness. Does anyone know where I can rent an instrument for a short period of time to do this? I would appreciate any leads.

: Thanks

: Tino




 
 Reply 
 
Phil Washburn
Phil Washburn
03:48 Mar-22-2000
Re: Surface roughness measurements
Hello,

I was wondering if anybody had a good estimation of the
roughness of wax. It is for my senior design project and
I would love it if anybody had a good guess. Thanks,

Phil Washburn
oredigger99@hotmail.com



 
 Reply 
 

Product Spotlight

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window