where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
443 views
Technical Discussions
PvB
PvB
01:30 Apr-08-2003
wet coating thickness measurement

Hello,

Can anyone give more info on the state of the art for remote measurement of the thickness of wet coating (non transparent)?

e.g. laser ultrasonics,
research projects

Greetings,
PvB
Zevenaar Elektronica & Sensoren BV.



    
 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
01:33 Apr-08-2003
Re: wet coating thickness measurement
Hello P.,

The auto industry has a similar task, I just don't know
how these systems would perform in your case.

Check this out:

http://www.optisense.com/pdf_Files/JOT_AST_6_2000.pdf

That system takes into account the temperature rise upon
exitation over a very small surface area. The company
is not too far away from yours, in Bochum, Germany.

Groetjes,

Joerg Schulze-Clewing.

: Hello,
.
: Can anyone give more info on the state of the art for remote measurement of the thickness of wet coating (non transparent)?
.
: e.g. laser ultrasonics,
: research projects
.
: Greetings,
: PvB
: Zevenaar Elektronica & Sensoren BV.
.



    
 
 Reply 
 
Rajeev Chaudhari
Director,
CALTECH ENGINEERING SERVICES, India, Joined Mar 2003, 13

Rajeev Chaudhari

Director,
CALTECH ENGINEERING SERVICES,
India,
Joined Mar 2003
13
07:15 Apr-09-2003
wet coating thickness measurement
Dear PvB,
Caltech Engineering Services provide remote measurement of thickness of wet coating (non transparent. This istrument has number of uses including automobile industry. For further details contact me at my email address caltech@vsnl.net


: Hello,
.
: Can anyone give more info on the state of the art for remote measurement of the thickness of wet coating (non transparent)?
.
: e.g. laser ultrasonics,
: research projects
.
: Greetings,
: PvB
: Zevenaar Elektronica & Sensoren BV.
.



    
 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window