where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
530 views
Technical Discussions
David Harvey
Engineering
ATI - Wah Chang, USA, Joined Nov 2002, 42

David Harvey

Engineering
ATI - Wah Chang,
USA,
Joined Nov 2002
42
09:52 Apr-14-2003
Manipulator for C-scan

Does anyone have a photo or image of the old CalData dual gimbal manipulator, used for immersion C-scan testing? I would greatly appreciate an image of the "bottom end" where the transducer is held. I am trying to determine if that basic design would meet my needs, and cannot recall precisely the design - I can just remember from almost 20 years ago that I liked their design.
Thanks for your assistance.


 
 Reply 
 
Richard Kazares
Richard Kazares
07:48 Apr-15-2003
Re: Manipulator for C-scan
We manufacturer a similar manipulator, available as part of our C-Scan Immersion systems, or seperately - at attractive pricing (we may possibly have a used one available) - if interested, I will send you a photo. Contact me directly.

: Does anyone have a photo or image of the old CalData dual gimbal manipulator, used for immersion C-scan testing? I would greatly appreciate an image of the "bottom end" where the transducer is held. I am trying to determine if that basic design would meet my needs, and cannot recall precisely the design - I can just remember from almost 20 years ago that I liked their design.
: Thanks for your assistance.
.



 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window