where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger Ing. Büro
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
6945 views
Articles & News
zhang
zhang
09:07 Jul-09-2013
TOFD Calculation Tool for iPad/iPhone App
Overall

good software, I need it, thanks

    
 
 Reply 
 
Leandro
Leandro
15:50 Jul-10-2013
Re: TOFD Calculation Tool for iPad/iPhone App
In Reply to zhang at 09:07 Jul-09-2013 (Opening).

Hi Zhang,

How do I get this software? Is it free?

Thank you.

Leandro Santos.

    
 
 Reply 
 
Liu
Engineering,
China, Joined Jul 2012, 34

Liu

Engineering,
China,
Joined Jul 2012
34
08:39 Nov-06-2013
Re: TOFD Calculation Tool for iPad/iPhone App
In Reply to zhang at 09:07 Jul-09-2013 (Opening).

same question as Leandro

    
 
 Reply 
 
Kathryn
Kathryn
19:57 Jan-06-2014
Re: TOFD Calculation Tool for iPad/iPhone App
In Reply to Liu at 08:39 Nov-06-2013 .

Hi All,

I just saw this post and wanted to respond. It is available on the iTunes Store:

https://itunes.apple.com/us/app/visualTOFD/id572819219?ls=1&mt=8

    
 
 Reply 
 
Kathryn
Kathryn
17:13 May-05-2014
Re: TOFD Calculation Tool for iPad/iPhone App
In Reply to Kathryn at 19:57 Jan-06-2014 .

Hi - Just wanted to check and see if you have used Visual TOFD and what your comments were.

    
 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window