where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

448 views
Technical Discussions
Surinder Pal
Engineering
IIT, India, Joined Apr 2003, 1

Surinder Pal

Engineering
IIT,
India,
Joined Apr 2003
1
09:34 Apr-16-2003
ASTM designation

Dear Sir/Madam,

>I have been working on pipe sizing for power plants. The >material for some pipes is "17 MN Mo 64 DIN".
>I am not familiar with this designation. Would you please help me with the equal designation of this material according to ASTM Code??
>I would also like to learn the method of designation used with "17 MN Mo 64 DIN".
>Please inform.
>Thanks a lot.
Surinder Pal



 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
01:35 Apr-18-2003
Re: ASTM designation
Surinder, I am not at all a steel expert but when in
doubt about different designations between DIN and
other standards one place to start looking would be
ASTM, maybe here:

http://www.astm.org/WSTEEL/worldsteel.pdf

Good luck, Joerg.


 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window