where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
342 views
Technical Discussions
pierre MARTY
R & D
Saab Aeronautic, Sweden, Joined Jul 2002, 5

pierre MARTY

R & D
Saab Aeronautic,
Sweden,
Joined Jul 2002
5
02:12 Apr-24-2003
Special coating for impact detection on composites

HI all

I recently heard about a product in which I would be interested if I had more information about it. This product is a (transparent ?) coating that can be sprayed on a composite structure. If the structure is impacted, the coating would keep 'memory' of the impact and would reveal it under fringing or UV light.
This is of course a very interesting product for localisation of sub surface small imact damages on composites.

That's all i know about it, plus that it is already an operational product and is, from what i heard, used by ARDE. But I do not know anything about its name, the company that produces it, etc.
Does anybody here know more about such product ?

Thanks in advance



 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
02:50 Apr-24-2003
Re: Special coating for impact detection on composites
Hi Pierre,

Maybe a good start would be to check out SPIE at:
www.spie.org

This organization deals a lot with imaging, coatings etc.

Another might be the Brinell Centre in Stockholm.

Good luck, Joerg.


 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window