where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GRANPECT COMPANY Ltd
GRANPECT bends to the industrialization of high-tech research achievements and specializes in research and development of various X-ray radiation imag ...

317 views
Technical Discussions
pierre MARTY
R & D
Saab Aeronautic, Sweden, Joined Jul 2002, 5

pierre MARTY

R & D
Saab Aeronautic,
Sweden,
Joined Jul 2002
5
02:12 Apr-24-2003
Special coating for impact detection on composites

HI all

I recently heard about a product in which I would be interested if I had more information about it. This product is a (transparent ?) coating that can be sprayed on a composite structure. If the structure is impacted, the coating would keep 'memory' of the impact and would reveal it under fringing or UV light.
This is of course a very interesting product for localisation of sub surface small imact damages on composites.

That's all i know about it, plus that it is already an operational product and is, from what i heard, used by ARDE. But I do not know anything about its name, the company that produces it, etc.
Does anybody here know more about such product ?

Thanks in advance



    
 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
02:50 Apr-24-2003
Re: Special coating for impact detection on composites
Hi Pierre,

Maybe a good start would be to check out SPIE at:
www.spie.org

This organization deals a lot with imaging, coatings etc.

Another might be the Brinell Centre in Stockholm.

Good luck, Joerg.


    
 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window