where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

408 views
Technical Discussions
Marc Trepanier
Marc Trepanier
04:45 Jan-09-1999
Looking for the Mfg. of a Transducer

I am looking for the manufacturer of a squirter system transducer.
What is scribed on the back is;
343
NDT PROD ENG
JA4-1.0/5
Can anybody help me?



 
 Reply 
 
Norm Woodward
Norm Woodward
05:19 Jan-11-1999
Re: Looking for the Mfg. of a Transducer
I think NDT Engineering Corporation, of Kent WA, USA, used to be known as NDT Product Engineering. They make transducers for squirter systems.

They may be reached by phone 206-872-3565, or by fax at 206-872-0857

: I am looking for the manufacturer of a squirter system transducer.
: What is scribed on the back is;
: 343
: NDT PROD ENG
: JA4-1.0/5
: Can anybody help me?




 
 Reply 
 
Juan Medina
Juan Medina
06:30 Feb-23-1999
Re: Looking for the Mfg. of a Transducer
: I am looking for the manufacturer of a squirter system transducer.
: What is scribed on the back is;
: 343
: NDT PROD ENG
: JA4-1.0/5
: Can anybody help me?




 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window