where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

492 views
Technical Discussions
Sherry Whitaker
Sherry Whitaker
06:20 Apr-28-2003
measuring thickness of coextruded plastic

I am trying to find a sound analytical technique to measure the thickness of a layer of co extruded crystallized plastic. Approximate total thickness of about 20-25ml , the top layer needing measured is around 5 to 10% of total.

Any info you can provide will be appreciated.


 
 Reply 
 
Dr. Patel
Dr. Patel
04:57 Apr-29-2003
Re: measuring thickness of coextruded plastic
: I am trying to find a sound analytical technique to measure the thickness of a layer of co extruded crystallized plastic. Approximate total thickness of about 20-25ml , the top layer needing measured is around 5 to 10% of total.
.
: Any info you can provide will be appreciated.
.
We have measured plastic thickness down to 100 micron with micron accuracy. The system can be used for on-line application. If you are interested please contact me at fallon@netcom.ca. We are using very simple pulse echo technique with broadband pulse of 50 MHz. Some error may occur due to nature of plastic where velocity of material may change.
Regards
Dr. Patel
Fallon Ultrasonics Inc
905-388-7853
Fax 905 387 5897


 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 159

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
159
05:29 May-08-2003
Re: measuring thickness of coextruded plastic
: : I am trying to find a sound analytical technique to measure the thickness of a layer of co extruded crystallized plastic. Approximate total thickness of about 20-25ml , the top layer needing measured is around 5 to 10% of total.
: .
: : Any info you can provide will be appreciated.
: .
: We have measured plastic thickness down to 100 micron with micron accuracy. The system can be used for on-line application. If you are interested please contact me at fallon@netcom.ca. We are using very simple pulse echo technique with broadband pulse of 50 MHz. Some error may occur due to nature of plastic where velocity of material may change.
: Regards
: Dr. Patel
: Fallon Ultrasonics Inc
: 905-388-7853
: Fax 905 387 5897
.
Some years ago I was involved in trying to measure the total wall thickness of co extruded plastic containers. The total thickness was about 2.0 - 2.5 mm which comprised of three layers with the centre layer being made from recycled plastic.Using ultrasonics, a digital caliper, we were not able to penetrate the full thickness and were only ever able to measure the first layer which was about 0.5mm thick. We used a 22MHz probe on a gauge type CL202P.
Therefore depending on the grain size of the crystalized plastic outer layer you should try using a shockwave probe in the frequency of 15 - 25 MHz plus a UFD high frequency capabilities or a Krautkramer thickness gauge from the CL range.
If all this doesn't work can you send a sample to us for trials.

Regards



 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window