where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
1742 views
Technical Discussions
Juan Amado
Engineering, Inspection
Arco Industrial, S.A., Panama, Joined Nov 2001, 44

Juan Amado

Engineering, Inspection
Arco Industrial, S.A.,
Panama,
Joined Nov 2001
44
23:48 Feb-25-2010
USM Go

I was practicing drawing a DAC curve with my new USM Go, but cannot erase it by the procedure shown in the instructions, anybody have this same issue?
Best regards,
Juan Amado

 
 Reply 
 
Phanindra Kumar
Phanindra Kumar
13:19 Feb-26-2010
Re: USM Go
In Reply to Juan Amado at 23:48 Feb-25-2010 (Opening).

Dear Amado,

Please recall the DAC/TCG curve which you stored. Go to DAC/TCG option, select SETUP menu. You will find a DELETE CURVE showing as . If you want to delete DAC curve, push joystick Left or Right after that press Function1+Function2 buttons at a time.

I think you will get the result, which you are looking for.

Can you please confirm, is that the above procedure have you followed?

Best Regards
Phanindra Kumar.M

 
 Reply 
 
marshall
marshall
04:59 Aug-14-2014
Re: USM Go
In Reply to Phanindra Kumar at 13:19 Feb-26-2010 .

I was trying to change from dual to multi mode and it would not allow until I deleted dac curve. I have tried procedures in manual and nothing has worked.

 
 Reply 
 
Marshall
Marshall
06:18 Aug-14-2014
Re: USM Go
In Reply to Phanindra Kumar at 13:19 Feb-26-2010 .

Ok yes, pressing the F1 and F2 button does delete the curve but when you realize the following.
DMS go the F1 and F2 buttons are both on the top toggles with F3 F4 on bottom.
USM go the F1 and F2 buttons are both on the bottom toggles with gain on top.
A three hour frustration trip depending on which mode you have become comfortable with first.
Don't think I will tell anyone else at the shop about this.. Why take all the fun out of it for them.
LOL

 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window