where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1970 views
Technical Discussions
Juan Amado
Engineering, Inspection
Arco Industrial, S.A., Panama, Joined Nov 2001, 44

Juan Amado

Engineering, Inspection
Arco Industrial, S.A.,
Panama,
Joined Nov 2001
44
23:48 Feb-25-2010
USM Go

I was practicing drawing a DAC curve with my new USM Go, but cannot erase it by the procedure shown in the instructions, anybody have this same issue?
Best regards,
Juan Amado

 
 Reply 
 
Phanindra Kumar
Phanindra Kumar
13:19 Feb-26-2010
Re: USM Go
In Reply to Juan Amado at 23:48 Feb-25-2010 (Opening).

Dear Amado,

Please recall the DAC/TCG curve which you stored. Go to DAC/TCG option, select SETUP menu. You will find a DELETE CURVE showing as . If you want to delete DAC curve, push joystick Left or Right after that press Function1+Function2 buttons at a time.

I think you will get the result, which you are looking for.

Can you please confirm, is that the above procedure have you followed?

Best Regards
Phanindra Kumar.M

 
 Reply 
 
marshall
marshall
04:59 Aug-14-2014
Re: USM Go
In Reply to Phanindra Kumar at 13:19 Feb-26-2010 .

I was trying to change from dual to multi mode and it would not allow until I deleted dac curve. I have tried procedures in manual and nothing has worked.

 
 Reply 
 
Marshall
Marshall
06:18 Aug-14-2014
Re: USM Go
In Reply to Phanindra Kumar at 13:19 Feb-26-2010 .

Ok yes, pressing the F1 and F2 button does delete the curve but when you realize the following.
DMS go the F1 and F2 buttons are both on the top toggles with F3 F4 on bottom.
USM go the F1 and F2 buttons are both on the bottom toggles with gain on top.
A three hour frustration trip depending on which mode you have become comfortable with first.
Don't think I will tell anyone else at the shop about this.. Why take all the fun out of it for them.
LOL

 
 Reply 
 

Product Spotlight

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window