where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

780 views
Technical Discussions
André Ribeiro
NDT Inspector,
Self Employed, Brazil, Joined Apr 2008, 18

André Ribeiro

NDT Inspector,
Self Employed,
Brazil,
Joined Apr 2008
18
10:20 Sep-10-2014
Omniscan air intake fan troubleshooting.

The air intake fan for the omniscan mx is supposed to run all the time when it's on, or it has a temperature sensor that switches it on and off?

I need to check this before sending it back to olympus for maintenance.

If anyone could please give an insight on this matter, it would be most helpfull.

Cheers.

 
 Reply 
 
Jason M.
Jason M.
21:56 Sep-10-2014
Re: Omniscan air intake fan troubleshooting.
In Reply to André Ribeiro at 10:20 Sep-10-2014 (Opening).

Hello,

The fan is linked to a temp sensor so it will start at approx. 50C and shut off if it cools below the approximate temperature. If you have more questions feel free to join the OmniScan User Group: https://www.linkedin.com/groups?home=&gid=4877375&trk=groups_item_detail-h-logo&goback=.gmr_4877375

Thank you

 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window