where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonatest Ltd
From our three distinct business centres in the UK, USA and CANADA, Sonatest design and produce a leading range of high performance ultrasonic NDT equipment and accessories.
1768 views
Technical Discussions
Matthew Cook
Matthew Cook
02:24 May-30-2003
broad swath ultrasonic thickness testing of ships hulls

NDT folks,

I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.

Any info/advice will be very appreciated.


 
 Reply 
 
Nick Welland
Nick Welland
01:03 May-31-2003
Re: broad swath ultrasonic thickness testing of ships hulls
: NDT folks,
.
: I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
.
: Any info/advice will be very appreciated.
.
I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
Regards
Nick


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:21 Jun-01-2003
Re: broad swath ultrasonic thickness testing of ships hulls
DNV did develop a version of their Corroscan system a numbe rof years ago for this application. it was relatively slow but marinised well. Physical Acoutsics/NDT Automation have developed a Large AREA UT C-Scan system which uses a stand off probe ideal for large resolution scanning but may need marinisation.

We successfully deployed scanning mechanisms for inspecting the bottom of captive tanker hulls for internal corrosion a number of years ago.

For more information contact me direct.



 
 Reply 
 
Richard Kazares
Richard Kazares
04:17 Jun-02-2003
Re: broad swath ultrasonic thickness testing of ships hulls
Test message

: : NDT folks,
: .
: : I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
: .
: : Any info/advice will be very appreciated.
: .
: I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
: Regards
: Nick
.



 
 Reply 
 
ishbel
Consultant, Engineering Consultant - NDT
Subsea 7, Norway, Joined Nov 1998, 11

ishbel

Consultant, Engineering Consultant - NDT
Subsea 7,
Norway,
Joined Nov 1998
11
09:40 Jun-06-2003
Re: broad swath ultrasonic thickness testing of ships hulls
: DNV did develop a version of their Corroscan system a numbe rof years ago for this application. it was relatively slow but marinised well.

The system DNV developed was a resonance system (not ultrasonics) using low frequency sound travelling through water (not actually based on Corroscan, which itself is based on the Pscan). The system is fast, and is mounted onto a very agile ROV. The company now supplying the service is ARGUS-RTM, and more details can be found at
http://www.oceaneering.com/printpages/oilfield/rov/crawler.htm

Ishbel


 
 Reply 
 
Asad
Asad
00:57 Nov-16-2006
Re: broad swath ultrasonic thickness testing of ships hulls
Dear?
I am sending you the proper link which will solve your problem.... please go to http://www.ndtpace.com
regards,
Asad
asadarizvi@yahoo.com
info@ndtpace.com

: NDT folks,
.
: I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
.
: Any info/advice will be very appreciated.
.



 
 Reply 
 
Asad
Asad
01:02 Nov-16-2006
Re: broad swath ultrasonic thickness testing of ships hulls
Dear?
I am sending you the link which will solve your problem....please visit http://www.ndtpace.com
regards,
Asad
asadarizvi@yahoo.com
info@ndtpace.com

: : NDT folks,
: .
: : I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
: .
: : Any info/advice will be very appreciated.
: .
: I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
: Regards
: Nick
.



 
 Reply 
 

Product Spotlight

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window