where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.
1770 views
Technical Discussions
Matthew Cook
Matthew Cook
02:24 May-30-2003
broad swath ultrasonic thickness testing of ships hulls

NDT folks,

I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.

Any info/advice will be very appreciated.


 
 Reply 
 
Nick Welland
Nick Welland
01:03 May-31-2003
Re: broad swath ultrasonic thickness testing of ships hulls
: NDT folks,
.
: I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
.
: Any info/advice will be very appreciated.
.
I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
Regards
Nick


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:21 Jun-01-2003
Re: broad swath ultrasonic thickness testing of ships hulls
DNV did develop a version of their Corroscan system a numbe rof years ago for this application. it was relatively slow but marinised well. Physical Acoutsics/NDT Automation have developed a Large AREA UT C-Scan system which uses a stand off probe ideal for large resolution scanning but may need marinisation.

We successfully deployed scanning mechanisms for inspecting the bottom of captive tanker hulls for internal corrosion a number of years ago.

For more information contact me direct.



 
 Reply 
 
Richard Kazares
Richard Kazares
04:17 Jun-02-2003
Re: broad swath ultrasonic thickness testing of ships hulls
Test message

: : NDT folks,
: .
: : I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
: .
: : Any info/advice will be very appreciated.
: .
: I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
: Regards
: Nick
.



 
 Reply 
 
ishbel
Consultant, Engineering Consultant - NDT
Subsea 7, Norway, Joined Nov 1998, 11

ishbel

Consultant, Engineering Consultant - NDT
Subsea 7,
Norway,
Joined Nov 1998
11
09:40 Jun-06-2003
Re: broad swath ultrasonic thickness testing of ships hulls
: DNV did develop a version of their Corroscan system a numbe rof years ago for this application. it was relatively slow but marinised well.

The system DNV developed was a resonance system (not ultrasonics) using low frequency sound travelling through water (not actually based on Corroscan, which itself is based on the Pscan). The system is fast, and is mounted onto a very agile ROV. The company now supplying the service is ARGUS-RTM, and more details can be found at
http://www.oceaneering.com/printpages/oilfield/rov/crawler.htm

Ishbel


 
 Reply 
 
Asad
Asad
00:57 Nov-16-2006
Re: broad swath ultrasonic thickness testing of ships hulls
Dear?
I am sending you the proper link which will solve your problem.... please go to http://www.ndtpace.com
regards,
Asad
asadarizvi@yahoo.com
info@ndtpace.com

: NDT folks,
.
: I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
.
: Any info/advice will be very appreciated.
.



 
 Reply 
 
Asad
Asad
01:02 Nov-16-2006
Re: broad swath ultrasonic thickness testing of ships hulls
Dear?
I am sending you the link which will solve your problem....please visit http://www.ndtpace.com
regards,
Asad
asadarizvi@yahoo.com
info@ndtpace.com

: : NDT folks,
: .
: : I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
: .
: : Any info/advice will be very appreciated.
: .
: I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
: Regards
: Nick
.



 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window