where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

IMG ULTRASUONI SRL
Ultrasonic transducers for industrial applications (NDT) and medical (Doppler effect). Probes, Ultrasonic instruments, Special systems for NDT.

3471 views
Career Discussions
Sean Peterssen
Sean Peterssen
07:45 Nov-15-2014
Interpretation of echo static and echo dynamic pattern combinations

My name is Sean Peterssen im a PCN level 2 Ultrasonic technician, I am looking for info or books on interperation and characterisation of echo static and echo dynamic combinations with pictures. Thank you and Regards Sean.

 
 Reply 
 
THEO MICOTTIS
Italy, Joined May 2013, 82

THEO MICOTTIS

Italy,
Joined May 2013
82
08:55 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Sean Peterssen at 07:45 Nov-15-2014 (Opening).

Dear Sean, EN ISO 23279 is an option. Regards Theo

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
09:59 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to THEO MICOTTIS at 08:55 Nov-15-2014 .

Sean

In 1986 The Welding Insitute, on behalf of the International Institute of Welding, produced a 50 page A5 booklet entitled "Evaluation of ultrasonic signals". This dealt exclusively with signals from flaws in welds.

Of particular interest are 7 pages of diagrams depicting typical echodynamic patterns expected from different flaw types. Its objective was to assist the operator to "..make an estimate of a defect's through-thickness size, even for very small defects."

Perhaps TWI still have them in stock.

 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
15:35 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Sean Peterssen at 07:45 Nov-15-2014 (Opening).

Hello Sean,

the following standard may help to evaluate moving ultrasonic signals:
ISO 16827:2014, Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities.

This standard is also a European Standard: EN ISO 16827.

With best regards

 
 Reply 
 
Rambabu
NDT Inspector,
AL HOTY STANGERS-SAUDI ARABIA, India, Joined May 2017, 1

Rambabu

NDT Inspector,
AL HOTY STANGERS-SAUDI ARABIA,
India,
Joined May 2017
1
22:45 Aug-18-2018
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Udo Schlengermann at 15:35 Nov-15-2014 .

BS EN ISO
16827:2014 how to get this standards..

 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window