where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems

3454 views
Career Discussions
Sean Peterssen
Sean Peterssen
07:45 Nov-15-2014
Interpretation of echo static and echo dynamic pattern combinations

My name is Sean Peterssen im a PCN level 2 Ultrasonic technician, I am looking for info or books on interperation and characterisation of echo static and echo dynamic combinations with pictures. Thank you and Regards Sean.

 
 Reply 
 
THEO MICOTTIS
Italy, Joined May 2013, 82

THEO MICOTTIS

Italy,
Joined May 2013
82
08:55 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Sean Peterssen at 07:45 Nov-15-2014 (Opening).

Dear Sean, EN ISO 23279 is an option. Regards Theo

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
09:59 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to THEO MICOTTIS at 08:55 Nov-15-2014 .

Sean

In 1986 The Welding Insitute, on behalf of the International Institute of Welding, produced a 50 page A5 booklet entitled "Evaluation of ultrasonic signals". This dealt exclusively with signals from flaws in welds.

Of particular interest are 7 pages of diagrams depicting typical echodynamic patterns expected from different flaw types. Its objective was to assist the operator to "..make an estimate of a defect's through-thickness size, even for very small defects."

Perhaps TWI still have them in stock.

 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
15:35 Nov-15-2014
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Sean Peterssen at 07:45 Nov-15-2014 (Opening).

Hello Sean,

the following standard may help to evaluate moving ultrasonic signals:
ISO 16827:2014, Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities.

This standard is also a European Standard: EN ISO 16827.

With best regards

 
 Reply 
 
Rambabu
NDT Inspector,
AL HOTY STANGERS-SAUDI ARABIA, India, Joined May 2017, 1

Rambabu

NDT Inspector,
AL HOTY STANGERS-SAUDI ARABIA,
India,
Joined May 2017
1
22:45 Aug-18-2018
Re: Interpretation of echo static and echo dynamic pattern combinations
In Reply to Udo Schlengermann at 15:35 Nov-15-2014 .

BS EN ISO
16827:2014 how to get this standards..

 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window