where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1687 views
Technical Discussions
Anders
Anders
03:09 Jul-22-2008
About Epoch LTC

Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
Thanks.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
04:51 Jul-22-2008
Re: About Epoch LTC
The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.

As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.


----------- Start Original Message -----------
: Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
07:24 Jul-22-2008
Re: About Epoch LTC
I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...

Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen

Good luck

Joe

---------- Start Original Message -----------
: The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
:
: : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : Thanks.
------------ End Original Message ------------




 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 889

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
889
00:50 Jul-23-2008
Re: About Epoch LTC
Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.

Cheerios,
Michel

----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 306

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
306
09:16 Jul-23-2008
Re: About Epoch LTC
In response to Joe's comments, I have had a "short play" with one of these instruments. I agree that the screen is a bit small, but it is designed to be a smaller and more portable version of the Epoch 4 and Epoch XT. If a bigger screen is needed, then the bigger instrument should be chosen.
Having said that, the "up to 50 DAC points" is a lot, but nobody is ever going to use that many.

Godfrey Hands
----------- Start Original Message -----------
: I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: Good luck
: Joe
: ---------- Start Original Message -----------
: : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: :
: : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : Thanks.
------------ End Original Message ------------




 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:43 Aug-22-2008
Re: About Epoch LTC
----------- Start Original Message -----------
: Good One Joe and how true! What burns me is that lots of manufacturers try to make instruments easy to handle for right hand people. It sucks! Or am I a little prejudice.
: Cheerios,
: Michel
: : I'm always wary of criticising the competition, and the LTC looks a nice litle unit. (I've never played with it seriously) but I can't help feeling that the display is just a tiny bit small for effective use of a 50 point curve...
: : Sounds like a typical marketing requirement, must fit in the pocket and have a 37-inch screen
: : Good luck
: : Joe
: : ---------- Start Original Message -----------
: : : The maximum number of points that you can program into the Epoch LTC's DAC curves is 50.
: : : As to whether it's any good, well, WE like it. :-) If you would like to let me know where you are located, I would be happy to put you in touch with a local representative who can arrange a demonstration.
: : :
: : : : Anybody can help me with some information about this equipment if it is good and how many points I can make during DAC curve.
: : : : Thanks.
------------ End Original Message ------------

It's a Lefty Revolt! Hide your Children!


 
 Reply 
 
Chaitanya Vasanthavada
Chaitanya Vasanthavada
17:26 Nov-15-2014
Re: About Epoch LTC
In Reply to David Hermanutz at 01:43 Aug-22-2008 .

No doubt that Epoch LTC is an excellent machine for UT. I am a bit confused in drawing DAC.
Can you explain the process of it.

 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window