where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

606 views
Technical Discussions
Christoph Schnitger
Christoph Schnitger
09:58 Jun-24-2003
MPI - Measurements of Defects

Dear Sirs...

we are looking for a camera system which is able to measure defects ( shown by a MPI-System under UV ), reporting the
defects to a database,and last but not least the software
is able to evaluate if its OK or NOK.
Software shall have a kind of teaching modus, lenght,figure, size etc...

Please do not hesitate to contact directly via mail:

schnitger@tcp-online.net

Thanks a lot for your help !!!


 
 Reply 
 
James Doyle
Consultant
Laser Techniques Company, LLC, USA, Joined Jan 2003, 6

James Doyle

Consultant
Laser Techniques Company, LLC,
USA,
Joined Jan 2003
6
07:39 Jun-26-2003
Re: MPI - Measurements of Defects
Hello,
Laser Techniques Company in Bellevue Wash. (USA) provides a laser-excited FPI system. You might want to check out our web site at www.laser-NDT.com to see if it would suit your needs.

Best regards,

James Doyle


 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window