where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Iris Inspection Services, Inc.
We are the world's largest supplier of air cooler, boiler and exchanger tubing inspection services.
1072 views
Technical Discussions
HADDAK chams-eddine
HADDAK chams-eddine
07:08 Jul-14-2003
search an ultrasonic simulation software for NDE

Hello,
i am a french future engineer working for the Snecma Moteurs in France.
We are looking for a software that could be able to simulate an ultrasonic non destructive evaluation,for pieces in immersion.

This software should be able to:

simulate an inspection path and give the virtual feedback (A-scans..., intensity distribution in observation plane...) as using a computerized UT equipment
model any defect
read CAD files
allow comparisons with flat bottom holes...
show the theoretical volume guarantee by the simulated inspection
treat 3D pieces, with complex geometry and several sound speed, attenuation, back echos, shadowed areas...
Do you have such a software, or contacts to give me in that field?

Please not reply to this mail automatically ans send me informations (documentation, price, possibility of on site testing...) at the following adress:

HADDAK Chams-Eddine
7 allée des anémones
95 460 Ezanville, FRANCE

chams-eddine.haddak@snecma.fr
haddakce@ensma.fr

+33(0) 6 89 78 10 70.
+33(0) 1 47 60 37 89

Thanks a lot,
Regards.


 
 Reply 
 
Uli Mletzko
R & D, Retired
Germany, Joined Nov 1998, 89

Uli Mletzko

R & D, Retired
Germany,
Joined Nov 1998
89
01:58 Jul-14-2003
Re: search an ultrasonic simulation software for NDE
: We are looking for a software that could be able to simulate an ultrasonic non destructive evaluation,for pieces in immersion.

Try to find a contact to NEA (Nuclear Energy Agency of France) at Saclay (South of Paris). Contact Person: Philippe Benoist.
They have good simulation software, which should match your requirements.

But I don't know the conditions of availability (for non nuclear resp. non governmental use).

Regards
Uli Mletzko
NDT Group, MPA, University of Stuttgart (Germany)


 
 Reply 
 
colin rawlinson
colin rawlinson
09:26 Jul-15-2003
Re: search an ultrasonic simulation software for NDE
True to life ultrasonic simulations are the business of www.auto-ut.co.uk.

Auto-ut offer ultrasonic simulations which incorporate virtual machines and virtual welds.


 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window