where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

950 views
Technical Discussions
Mahmoud M
Mahmoud M
05:06 Jul-15-2003
MFL and LFET

What the difference between MFL with permanent magnets and use low frequency electromagnetic technique


    
 
 
Dana H. Ives
Engineering
CoreStar International Corp., USA, Joined Jan 2003, 10

Dana H. Ives

Engineering
CoreStar International Corp.,
USA,
Joined Jan 2003
10
02:34 Jul-21-2003
Re: MFL and LFET
: What the difference between MFL with permanent magnets and use low frequency electromagnetic technique
.
In a nutshell: MFL uses permanent magnets with all the possible problems associated such as breakage, collection of debris, difficulty in smoothly transiting surfaces that are irregular, etc. LF Electromagnetic techniques require more sophisticated coil excitation circuitry with its associated filtration requirements due to LF noise, lower scan speeds to reduce missing anomolies, etc.


    
 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window