where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1021 views
Technical Discussions
Bijay Muduli
Bijay Muduli
05:43 Jul-21-2003
Lining Thickness measurement

Dear Experts

Can the thickness of lining be measured in an internal cement lined pipe?

What other meathod is used to ensure uniform lining thickness in a smaller diameter piping having internal cement lining??

Thank you


 
 Reply 
 
Sasaki
Sasaki
08:28 Jul-22-2003
Re: Lining Thickness measurement
RT can be applicable to measure the thickness and the thickness uniformity of ganite lining of pipe inside.


 
 Reply 
 
Bijay Muduli
Engineering
IOCL, India, Joined Jul 2003, 4

Bijay Muduli

Engineering
IOCL,
India,
Joined Jul 2003
4
03:20 Aug-25-2003
Re: Lining Thickness measurement
I am inviting more opinions / (methods) on this subject.

Thanks & regards

B K Muduli


Dear Experts
.
: Can the thickness of lining be measured in an internal cement lined pipe?
.
: What other meathod is used to ensure uniform lining thickness in a smaller diameter piping having internal cement lining??
.
: Thank you
.



 
 Reply 
 
David Castle
David Castle
05:12 Apr-02-2005
Re: Lining Thickness measurement
: Dear Experts
.
: Can the thickness of lining be measured in an internal cement lined pipe?
.
: What other meathod is used to ensure uniform lining thickness in a smaller diameter piping having internal cement lining??
.
: Thank you
.

The thickness of cement lined pipe should be able to be measured using an eddy current device that is designed for the range of thicknesses that you are wanting to measure. I have used the Dinsearch DS500 for measuring Inconel cladding thickness in the range of 0 to 10 mm thickness with very good success. The company can be reached at:

Dinsley Devices Limited,
Ivy House, Streatlam Park,
County Durham, DL12 8TZ, UK.
Phone/Fax: +44 (0)1833 637971
email: dinsearch@hotmail.com

I hope that this is of help. Good Luck.
I hope that this may hekp you.



 
 Reply 
 
Charles Owston, Dinsley Devices Ltd
Charles Owston, Dinsley Devices Ltd
04:11 Apr-05-2005
Re: Lining Thickness measurement
----------- Start Original Message -----------
: : Dear Experts
: .
: : Can the thickness of lining be measured in an internal cement lined pipe?
: .
: : What other meathod is used to ensure uniform lining thickness in a smaller diameter piping having internal cement lining??
: .
: : Thank you
: .
: The thickness of cement lined pipe should be able to be measured using an eddy current device that is designed for the range of thicknesses that you are wanting to measure. I have used the Dinsearch DS500 for measuring Inconel cladding thickness in the range of 0 to 10 mm thickness with very good success. The company can be reached at:
: Dinsley Devices Limited,
: Ivy House, Streatlam Park,
: County Durham, DL12 8TZ, UK.
: Phone/Fax: +44 (0)1833 637971
: email: dinsearch@hotmail.com
: I hope that this is of help. Good Luck.
: I hope that this may hekp you.
------------ End Original Message ------------

At Dinsley Devices Ltd we have over 25 years of experience in providing inovative solutions to problems in the inspection of pipes.

If you care to send details of your problem we will see if we can offer a solution.



 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window