where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

705 views
Technical Discussions
gulay litchfield
gulay litchfield
06:32 Jul-22-2003
Crack detection

Dear All
We are producing punches and dies for the tabletting machines (presses) in the pharmaceutical industry. Currently, we have been sourcing a crack detection equipment (for very fine cracks) for surface and sub-surface cracks.Eventhough we have liquid penetrant and optical measurement equipment in place, these methods are time consuming eventhough very effective. The ideal method should detect the cracks within less than a minute. Our products are made of steel and average material thickness is 16 mm. If you suggest any method or equipment which allows us perform the test in less than a minute and also precise, this would be highly appreciated.
Meanwhile, we tried Eddy current method and this did not give the expectant results, was not effective. For more information about our products, you can visit our web site.
www.iholland.co.uk
Could Magnetic Particle-Fluorescent, Ultrasonic test or Magnetic Barkhausen Noise method be the answer?
Thank you in advance





 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 281

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
281
09:56 Jul-24-2003
Re: Crack detection
You might consider resistivity measurement. 4 point pin resisitivity measures very fine chganges in measurement resistance over a set pin spacing. Changes in resisitivity due to prescence of a crack are possible. Once set up properly it is less than a minute per spot. If you wish to pursue please contact me.


 
 Reply 
 
Jamie Gauthier
Jamie Gauthier
06:07 Jul-24-2003
Re: Crack detection
You might consider ACFM (Alternating Current Field Measurement). Very accurate and fast for measuring surface breaking cracks. Can work in high temperatures as well and gives a recordable image.


 
 Reply 
 
abdallah hassan
abdallah hassan
05:35 Aug-04-2003
Re: Crack detection
: You might consider resistivity measurement. 4 point pin resisitivity measures very fine chganges in measurement resistance over a set pin spacing. Changes in resisitivity due to prescence of a crack are possible. Once set up properly it is less than a minute per spot. If you wish to pursue please contact me.
.plz reply quickly either refuse or accept




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window