where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

638 views
Technical Discussions
misha
misha
09:43 Aug-10-2003
digital oscilloscope question

for a long time i'm looking for the digital oscilloscope wich works just as analog one. I mean NOT a image on screen, but algorithm.
For instance: digital oscilloscope is waiting for trigger and then downloading data into memory for prosceccing;
analog oscilloscope represetns input signal scan n, n+1 and so on.
time delay between scan n and n+1 is constant (for instant= t sec.) (of course if user is not canging syncronization). Stabilizaton of the picture on the screen accomplishs by changing value t.
quesiton is does enyone know about DIGITAL!!! oscilloscope with such feature like analog have.




 
 Reply 
 
Johny English
Johny English
06:29 Aug-11-2003
Re: digital oscilloscope question
Tektronix TDS 210 will do the job for you. 6o MHZ bandwidth, 1GS/s


----------- Start Original Message -----------
: for a long time i'm looking for the digital oscilloscope wich works just as analog one. I mean NOT a image on screen, but algorithm.
: For instance: digital oscilloscope is waiting for trigger and then downloading data into memory for prosceccing;
: analog oscilloscope represetns input signal scan n, n+1 and so on.
: time delay between scan n and n+1 is constant (for instant= t sec.) (of course if user is not canging syncronization). Stabilizaton of the picture on the screen accomplishs by changing value t.
: quesiton is does enyone know about DIGITAL!!! oscilloscope with such feature like analog have.
------------ End Original Message ------------




 
 Reply 
 
Chandima
Chandima
05:00 Nov-17-2004
Re: digital oscilloscope question
I want some tutorials about following sections of digital oscilloscope.
1.] major operational principles of the instrument.
[2.] measurement techniques associated with the equipment.
[3.] special techniques that can be used to improve the accuracy of the measurement.
[4.] special considerations associated with attachments such as probes.
[5.]instrumentation problems and associated measurement errors.
[6.] applications associated with the instrument.


 
 Reply 
 
Rich Markley
Rohde & Schwarz, USA, Joined Dec 2018, 1

Rich Markley

Rohde & Schwarz,
USA,
Joined Dec 2018
1
00:33 Dec-12-2018
Re: digital oscilloscope question
In Reply to misha at 09:43 Aug-10-2003 (Opening).

Hi Misha, I think what you're looking for is a digital oscilloscope with a fast waveform update rate. Since you first posted this question, digital scopes have gotten much faster in this regard. Even lower-priced scopes, such as the Rohde&Schwarz RTC1000, have waveform update rates of more than 10,000 waveforms per second. When coupled with the other advantages of a digital oscilloscope, such as the ability to perform FFTs, capture signals to memory, and make a variety of automatic measurements, you'll find that these new digital oscilloscopes will do a very good job for you.

 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window