where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1605 views
Technical Discussions
jagan
Engineering,
Saudi Arabia, Joined Dec 2011, 23

jagan

Engineering,
Saudi Arabia,
Joined Dec 2011
23
14:18 Apr-04-2015
Inconnel625 2" 8.74mm best technique for meterial defects???

Gents,

Suggest a best technique to find materiel defect for 2inch 8.74mm inconnel625 meterial
To cover overall pipe from id to od, need to inspect entire length.

As of me IRIS is suitable
need other opinions in dis regards.

Thanks.

 
 Reply 
 
Johann Hinken
FI Test- und Messtechnik GmbH, Germany, Joined May 2014, 18

Johann Hinken

FI Test- und Messtechnik GmbH,
Germany,
Joined May 2014
18
15:05 Apr-08-2015
Re: Inconnel625 2" 8.74mm best technique for meterial defects???
In Reply to jagan at 14:18 Apr-04-2015 (Opening).

Hello,
in case you are interested in defects being ferromagnetic inclusions, I suggest magnetometry. That is a sensitive magnetic measurement after magnetisation. If you are interested I can give you more details.
Regards, Johann

 
 Reply 
 
R Dhanasekaran
Other, TEAM LEADER NDT
VESTAS WIND TECHNOLOGY INDIA PVT LTD, India, Joined Apr 2012, 15

R Dhanasekaran

Other, TEAM LEADER NDT
VESTAS WIND TECHNOLOGY INDIA PVT LTD,
India,
Joined Apr 2012
15
11:25 Apr-09-2015
Re: Inconnel625 2" 8.74mm best technique for meterial defects???
In Reply to jagan at 14:18 Apr-04-2015 (Opening).

Dear Jagan,

what kind of defects are you looking for?

i would not suggest IRIS for detecting Cracks.

Regards
R.Dhanasekaran

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
12:13 Apr-09-2015
Re: Inconnel625 2" 8.74mm best technique for meterial defects???
In Reply to R Dhanasekaran at 11:25 Apr-09-2015 .

What length of pipe (tube) and how many pipes? Is that 8,74mm wall thickness?

I would recommend immersion UT with one probe sending sound in at 0 degrees looking for longitudinal defects and another compression wave offset from TDC to introduce shear wave looking for radial (through thickness) defects. Pipe (tube) will be rotated. There is a simple calculation based on ID/OD to determine optimum offset.

 
 Reply 
 
jagan
Engineering,
Saudi Arabia, Joined Dec 2011, 23

jagan

Engineering,
Saudi Arabia,
Joined Dec 2011
23
14:20 Apr-09-2015
Re: Inconnel625 2" 8.74mm best technique for meterial defects???
In Reply to Johann Hinken at 15:05 Apr-08-2015 .

Dear Johann Hinken,

Thanks forthe suggession.
can explain how it can be done
Magnetometry???

 
 Reply 
 
jagan
Engineering,
Saudi Arabia, Joined Dec 2011, 23

jagan

Engineering,
Saudi Arabia,
Joined Dec 2011
23
14:27 Apr-09-2015
Re: Inconnel625 2" 8.74mm best technique for meterial defects???
In Reply to Nigel Armstrong at 12:13 Apr-09-2015 .

Dear Nigel Armstrong,

Yse 8.74mm wall thickness 2inch dia and its 60 meter long spool with more than ten welds.
length is also an issue if we go for immersion.

thanks.

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
14:42 Apr-09-2015
Re: Inconnel625 2" 8.74mm best technique for meterial defects???
In Reply to jagan at 14:27 Apr-09-2015 .

im amazed that you didnt consider giving this info origimally!

 
 Reply 
 
Johann Hinken
FI Test- und Messtechnik GmbH, Germany, Joined May 2014, 18

Johann Hinken

FI Test- und Messtechnik GmbH,
Germany,
Joined May 2014
18
16:30 Apr-09-2015
Re: Inconnel625 2" 8.74mm best technique for meterial defects???
In Reply to jagan at 14:20 Apr-09-2015 .

Hello Jagan,

the "magnetometry" consists of two steps: 1.) magnetizing the part in a strong dc magnetic field and 2.) scanning the surface of the part by a sensitive magnetometer which excludes the influence of background fields. The method is good for the detection of very small ferromagnetic inclusions in non-magnetic alloys like Inconel. We use it routinely in the inspection of aero engine turbine discs.

Regards, Johann

 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window