where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

7561 views
Technical Discussions
Azrul Hilmi
Azrul Hilmi
03:25 Sep-12-2007
B31 code case 179

Dear All,

Just wondering, do you know where can I get a copy of the B31 code case 179 'Use of Alternative Ultrasonic Examination in Lieu of Radiography for B31.1 Applications in Materials ½ inch and Less in Wall Thickness'. I've checked with IHS, and they do not have it.

rgds
Azrul


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
04:07 Sep-12-2007
Re: B31 code case 179
Its actually Code Case 181

the following link should get you to it.


cstools.asme.org/csconnect/pdf/CommitteeFiles/15243.pdf



 
 Reply 
 
Azrul Hilmi
Azrul Hilmi
06:53 Sep-12-2007
Re: B31 code case 179
I can confirm it is definitely Code Case 179.
Anybody know where I can get it?

----------- Start Original Message -----------
: Its actually Code Case 181
: the following link should get you to it.
:
: cstools.asme.org/csconnect/pdf/CommitteeFiles/15243.pdf
------------ End Original Message ------------




 
 Reply 
 
David Mackintosh
Engineering,
Acuren Group Inc., Canada, Joined Feb 2011, 85

David Mackintosh

Engineering,
Acuren Group Inc.,
Canada,
Joined Feb 2011
85
08:03 Sep-17-2007
Re: B31 code case 179
B31 Case 179 (for B31.1) — "Use of Ultrasonic Examination in Lieu of Radiography for B31.1 Applications in Materials 1⁄2 in. and Less in Wall Thickness" is published in ASME B31.1b-2006, Addenda to ASME B31.1-2004, Power Piping, page C-22. (B31.1 itself only allows UT on wall thicknesses greater than ½ inch.)

B31 Case 181 (for B31.3) — "Use of Alternative Ultrasonic Examination Acceptance Criteria in ASME B31.3" describes conditions for fracture mechanics evaluation of flaws. Almost identical to Code Case 2235, except that there is no lower limit on wall thickness.
Available at http://cstools.asme.org/csconnect/pdf/CommitteeFiles/15243.pdf


----------- Start Original Message -----------
: Dear All,
: Just wondering, do you know where can I get a copy of the B31 code case 179 'Use of Alternative Ultrasonic Examination in Lieu of Radiography for B31.1 Applications in Materials ½ inch and Less in Wall Thickness'. I've checked with IHS, and they do not have it.
: rgds
: Azrul
------------ End Original Message ------------




 
 Reply 
 
Owen Konski
Owen Konski
01:44 Jul-15-2008
Re: B31 code case 179
The link provided takes you to what is for B31.3 (Case 181) and a couple other Cases however the 179 is not in the document. Are you saying Case 181 applies in lieu of 179?


----------- Start Original Message -----------
: Its actually Code Case 181
: the following link should get you to it.
:
: cstools.asme.org/csconnect/pdf/CommitteeFiles/15243.pdf
------------ End Original Message ------------




 
 Reply 
 
Wilyan Safitra
NDT Inspector,
Indonesia, Joined Sep 2010, 16

Wilyan Safitra

NDT Inspector,
Indonesia,
Joined Sep 2010
16
06:59 May-11-2015
Re: B31 code case 179
Download

Download

Download

B31 code case 179 2006 edition
 
 Reply 
 
Bill
USA, Joined Jan 2010, 52

Bill

USA,
Joined Jan 2010
52
22:45 May-11-2015
Re: B31 code case 179
In Reply to David Mackintosh at 08:03 Sep-17-2007 .

David,

FYI-Both of the references you made are very out dated.

 
 Reply 
 

Product Spotlight

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window