where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON Copenhagen
YXLON Copenhagen is a highly specialized, award winning Danish company with 60 years of experience in portable X-ray solutions for industrial NDT.
424 views
Technical Discussions
Safiye Nihan ERTURK
Safiye Nihan ERTURK
05:25 Jan-25-1999
US testing of wood

Hi,
Can anybody tell me where I can purchase US testing
equipment for in situ nondestructive evaluation of
wooden structural elements in buildings?
I'd like to know if low frequency transducers with
conical heads specially designed for use on wood,
like the type mentioned in the paper by Sandoz
(10th International Symp on NDT of Wood, Lausanne,
1996) are available in the market.
Any information on US NDT of wooden structures
and anyone interested in sharing experience on the
subject is also welcome.
Best regards,
Nihan



 
 Reply 
 
John McCanna
John McCanna
01:12 Jan-27-1999
Re: US testing of wood
: Hi,
: Can anybody tell me where I can purchase US testing
: equipment for in situ nondestructive evaluation of
: wooden structural elements in buildings?
: I'd like to know if low frequency transducers with
: conical heads specially designed for use on wood,
: like the type mentioned in the paper by Sandoz
: (10th International Symp on NDT of Wood, Lausanne,
: 1996) are available in the market.
: Any information on US NDT of wooden structures
: and anyone interested in sharing experience on the
: subject is also welcome.
: Best regards,
: Nihan

Good Evening Nihan

I contacted you earlier providing partial information.
You can contact Mr. Jeff DeWalt at CANDET, 124 Skyway Avenue,
Rexdale, Ontario, Canada M9W 4Y9 Phone: (416) 213-8000,
Fax: (416) 213-8004.

I believe they also have a web site. Try www.candet.com
or www.candet.ca

Good luck

John McCanna


 
 Reply 
 
Andrew Holuszko
Andrew Holuszko
09:59 Jan-30-1999
Re: US testing of wood
Dear Sir,
We are selling a commercial equipment which could be used for the wood testing.
The CT-3 Concrete/Material Tester; it is a handheld, battery powered tester working in about 40 kHz to 4 MHz frequency range, up to 600 V output. It displays the TOF between the probes. Unit works with the variety of custom probes including the conical head probes. The unit is manufactured by Unipan.
Please contact me for more details.
Regards,

Andrew Holuszko/Western NDE & Engineering Ltd.
Vancouver, BC, Canada





 
 Reply 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Content on Demand by Eddyfi Technologies

Finding yourself in front of a screen practicing safe social distancing instead of out in the fiel
...
d? At Eddyfi Technologies, we are doing our part in helping you be better prepared for what comes next. We introduce to you Eddyfi on Demand. Fill your schedule with webinars, how-to videos, informative technical papers and our NEW addition: Eddyfi Academy. There, you will have access to FREE online courses and obtain certificates of attendance once completed in order for you to include these e-learning sessions in your log of required training hours. Join us today. Stay safe, stay Beyond Current.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window