where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2710 views
Articles & News
MD RAKIB UDDIN
MD RAKIB UDDIN
14:09 Jun-13-2015
Echo Graphic introduces the EG430NDT, a X-ray film processor designed for Non-Destructive Testing (NDT)

Dear sir,
I am Rakib uddin from walton Hi Tech Industries Ltd .We are going to establish compressor project where we will cast compressor parts such as crank shaft,crank case ,bearing.So is this machine capable to detect casting defect?

 
 Reply 
 
Dr. Uwe Zscherpel
Director,
BAM Berlin, Germany, Joined Jan 2010, 83

Dr. Uwe Zscherpel

Director,
BAM Berlin,
Germany,
Joined Jan 2010
83
11:45 Jun-14-2015
Re: Echo Graphic introduces the EG430NDT, a X-ray film processor designed for Non-Destructive Testing (NDT)
In Reply to MD RAKIB UDDIN at 14:09 Jun-13-2015 (Opening).

Dear RAKIB UDDIN,
to detect casting defects you will need beside a film processor also industrial NDT films and a suitable chemistry for film development and also an X-ray tube for film exposure! If they all fulfill the requirements of ISO 11699 in their combination, only than you are able to detect casting indications using the film system class as specified in ISO 11699-1 and the quality assurance as described in ISO 11699-2.
A processor alone does not do the job!
Greetings
Uwe Z.

 
 Reply 
 

Product Spotlight

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window