where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2711 views
Articles & News
MD RAKIB UDDIN
MD RAKIB UDDIN
14:09 Jun-13-2015
Echo Graphic introduces the EG430NDT, a X-ray film processor designed for Non-Destructive Testing (NDT)

Dear sir,
I am Rakib uddin from walton Hi Tech Industries Ltd .We are going to establish compressor project where we will cast compressor parts such as crank shaft,crank case ,bearing.So is this machine capable to detect casting defect?

 
 Reply 
 
Dr. Uwe Zscherpel
Director,
BAM Berlin, Germany, Joined Jan 2010, 83

Dr. Uwe Zscherpel

Director,
BAM Berlin,
Germany,
Joined Jan 2010
83
11:45 Jun-14-2015
Re: Echo Graphic introduces the EG430NDT, a X-ray film processor designed for Non-Destructive Testing (NDT)
In Reply to MD RAKIB UDDIN at 14:09 Jun-13-2015 (Opening).

Dear RAKIB UDDIN,
to detect casting defects you will need beside a film processor also industrial NDT films and a suitable chemistry for film development and also an X-ray tube for film exposure! If they all fulfill the requirements of ISO 11699 in their combination, only than you are able to detect casting indications using the film system class as specified in ISO 11699-1 and the quality assurance as described in ISO 11699-2.
A processor alone does not do the job!
Greetings
Uwe Z.

 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window