where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
519 views
Technical Discussions
Charlie Jackson
Engineering
MBINSPECTION, United Kingdom, Joined Aug 2003, 7

Charlie Jackson

Engineering
MBINSPECTION,
United Kingdom,
Joined Aug 2003
7
05:19 Sep-17-2003
Non-intrusive inspection of tank floors in annular region

Dear members
Does anyone know of a method or technique which can assess the floor plate of a vertical tank in the region of the shell annular. The annular lip standout available is 35mm max and the thickness of the annular 12mm. The LORUS system has been used for a number of years but I believe the standout required is +50mm.
Regards Charlie Jackson


 
 Reply 
 
Haswadi Yusof
Haswadi Yusof
06:30 May-13-2004
Re: Non-intrusive inspection of tank floors in annular region
Does anyone know how can I get the details of this LORUS system? I need to have at least thickness measurement data at annular areas for corrosion monitoring purposes.

Regards
Haswadi

----------- Start Original Message -----------
: Dear members
: Does anyone know of a method or technique which can assess the floor plate of a vertical tank in the region of the shell annular. The annular lip standout available is 35mm max and the thickness of the annular 12mm. The LORUS system has been used for a number of years but I believe the standout required is +50mm.
: Regards Charlie Jackson
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window