where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1123 views
Technical Discussions
Iraj Gorjani
Iraj Gorjani
07:44 Sep-29-2003
MCrAlY coating thickness measurment


please explain to me about MCrAlY coating thickness measurment with NDT process(eddy current or other process).This coating produced with LPPS process,after that enrich aluminum content in surface with pack cementation.I will be happy if you introduce a company that sell this kind of equipments.

Best Regards
Iraj Gorjani



 
 Reply 
 
Anish Kumar
R & D, Scientist
Indira Gandhi Centre for Atomic Research, India, Joined Mar 2000, 7

Anish Kumar

R & D, Scientist
Indira Gandhi Centre for Atomic Research,
India,
Joined Mar 2000
7
07:37 Sep-30-2003
Re: MCrAlY coating thickness measurment
Dear Mr. Gorjani,

You may see a recent paper in Mater. Eval., where a new methodology has been presented for measurement of NiAl coating thickness on Inconel 718. The coating was developed by pack cementaiton process. The reference is as follows:

Anish Kumar, V. Shankar, T. Jayakumar, G. Srinivasan and Baldev Raj, "Nondestructive Measurement of Coating Thickness using Through Thickness Ultrasonic Velocity Measurements", Materials Evaluation, Vol. 60 (6) (2002) pp 791-794.

you may also visit my homepage for details about this work.
http://www.geocities.com/vanianish/publications_for_website.html

With regards,

Anish


----------- Start Original Message -----------
:
: please explain to me about MCrAlY coating thickness measurment with NDT process(eddy current or other process).This coating produced with LPPS process,after that enrich aluminum content in surface with pack cementation.I will be happy if you introduce a company that sell this kind of equipments.
: Best Regards
: Iraj Gorjani
------------ End Original Message ------------




 
 Reply 
 
saman sajjadi
saman sajjadi
08:10 Dec-04-2003
Re: MCrAlY coating thickness measurment
Dear/ sir:

We are the manufacturer, importer and export petrol dispensing pump, LPG dispenser, air compressor.
We are interested in your company and your product,
We paint our products (pump) by powdering color system, wet color system

Now we inclined to test our coloring resistance by COATING THICKNESS MEASURMENT


Please send us more information about your products by brochures and catalogue with price list.


Best regards,


Address: turkey konya 3 orgsanize san ziyaadin cad no :24
P.O.BOX :42300


HASAN BULGURCU
Reserch and development manager



 
 Reply 
 
zahra khakpour
zahra khakpour
01:57 Jan-31-2004
Re: MCrAlY coating thickness measurment
----------- Start Original Message -----------
:
: please explain to me about MCrAlY coating thickness measurment with NDT process(eddy current or other process).This coating produced with LPPS process,after that enrich aluminum content in surface with pack cementation.I will be happy if you introduce a company that sell this kind of equipments.
: Best Regards
: Iraj Gorjani
------------ End Original Message ------------
zahra khakpour
materials&energy research center




 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window