where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

8480 views
Technical Discussions
Dr. Ahmed Yamani
Director, - President & CEO
Yamani Institute of Technology, Algeria, Joined Nov 2001, 23

Dr. Ahmed Yamani

Director, - President & CEO
Yamani Institute of Technology,
Algeria,
Joined Nov 2001
23
09:56 Jan-10-2002
Looking for Companies using intelligent tool (PIG) for pipe inspection

Dear All,

I appreciate the effort of directing me to companies worldwide specialized in the intelligent tool "pig system" (pipe inspection).

Thank you.


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 281

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
281
00:35 Jan-10-2002
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
For Free Swimming Intelligent tools
Rosen Germany/Holland
Tubocope Vetco (Linalog) Borden Hampshire UK
PII UK Newcastle/Aberdeen
BJ Hughes Pipeline Services USA

NKK Japan (Ultrasonics Only)

For Tethered Intelligent Tools

PSL AGR Bergen Norway
RTD Netherlands


 
 Reply 
 
Petroman Marketing ( D ) Pvt Ltd
Petroman Marketing ( D ) Pvt Ltd
03:20 Jul-15-2002
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
: We are a liasion company and for one of client in gas pipeline buisness looking for intelligent pig based on magnetic flux leakage technique to detect and qualify internal and external corrosion / mechnical defects and other anomalies preceded by proving, cleaning and gauging and caliper pig run.


 
 Reply 
 
thomas powers
thomas powers
04:57 Jul-16-2002
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
In reply to Pig inspection devices: Our company has been developing and implementing NDE inspection devices for pipes for over 25 years. We have numerous patents for devices used to inspect all different sizes of pipes, some over 18 feet in diameter, and less than 1/2 inch in diameter, using internal mechanical pipe following devices. We use a variety of NDE technologies, but have recently developed non-contact ways to transfer Ultrasonic waves to and from pipes for complete volumetric inspection of pipe walls.
We are not an inspection company for installed pipe, but we can develop devices for others to use.
contact: Tom Powers 434-522-5714


 
 Reply 
 
GE Inspection Systems/PII Pipe Integrety Inspections
NDT Inspector
GE Inspection Services, USA, Joined Aug 2001, 8

GE Inspection Systems/PII Pipe Integrety Inspections

NDT Inspector
GE Inspection Services,
USA,
Joined Aug 2001
8
05:16 Jul-16-2002
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
: : We are a liasion company and for one of client in gas pipeline buisness looking for intelligent pig based on magnetic flux leakage technique to detect and qualify internal and external corrosion / mechnical def
.
Yes, we have a wide selection of PIGs just for this
kind of inspection...I am not the expert, but can get
you to the right person...call me at 1 800 845-1923.

Regards
Mikie



 
 Reply 
 
BASIS tech
BASIS tech
08:43 Aug-07-2002
Re: Looking for suppliers of pipe-extrusion accessory for automatic & simultaneous location of dropplet insert
For Free Swimming Intelligent tools
Wew ask for suppliers of irrig. pipe-extrusion accessory for automatic & simultaneous location of dropplet insert.

: Rosen Germany/Holland
: PII UK Newcastle/Aberdeen
: BJ Hughes Pipeline Services USA
: NKK Japan (Ultrasonics Only)
: For Tethered Intelligent Tools
: PSL AGR Bergen Norway



 
 Reply 
 
Vikas Marwaha
Engineering
Graffin Technologies, India, Joined Nov 2003, 4

Vikas Marwaha

Engineering
Graffin Technologies,
India,
Joined Nov 2003
4
02:53 Aug-09-2002
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
: : We are a company carrying out cleaning, guaging and caliper pig runs for cross country pipelines

Please contact us if your require any further detial in this regards


 
 Reply 
 
Indrajit Sisodia
Indrajit Sisodia
10:04 Apr-21-2011
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
In Reply to thomas powers at 04:57 Jul-16-2002 .

I want to conduct intelligent pigging for one of the pipe line on urgent basis. Our requirement is to do thickness measurement & OD/ID measurement by using intelligent pigging.

Indrajit Sisodia
NDT Level III
Inspection & Corrosion - MAA
Kuwait National Petroleum Company
E-mail : ins999@knpc.com
Tel : 00965 23202849

 
 Reply 
 
Indrajit Sisodia
Indrajit Sisodia
10:22 Apr-21-2011
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
In Reply to John O'Brien at 00:35 Jan-10-2002 .

want to conduct intelligent pigging for one of the pipe line on urgent basis. Our requirement is to do thickness measurement & OD/ID measurement by using intelligent pigging.

Indrajit Sisodia
NDT Level III
Inspection & Corrosion - MAA
Kuwait National Petroleum Company
E-mail : ins999@knpc.com
Tel : 00965 23202849

 
 Reply 
 
Lalit Mohan Kothari
Consultant, -
On ..IOCL and BARC(Bhabha Atomic Research Centre).etc, India, Joined Jan 2003, 128

Lalit Mohan Kothari

Consultant, -
On ..IOCL and BARC(Bhabha Atomic Research Centre).etc,
India,
Joined Jan 2003
128
19:26 Apr-21-2011
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
In Reply to Indrajit Sisodia at 10:22 Apr-21-2011 .

Sisodia,
Please contact Mr.K Prathap
also can visit there web.
Mr. kakoru Prathap
Hydrotest Engineer,
Narmada Offshore Constructions Pvt.Ltd.

Thanks &Regard

 
 Reply 
 
ummerkoya
ummerkoya
11:15 Jun-12-2012
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
In Reply to GE Inspection Systems/PII Pipe Integrety Inspections at 05:16 Jul-16-2002 .

Mike,
We are one of the leading service providers to the oil and gas Industry.We are looking for a potential company to technically support us for a major multimillion dollar project in inline pipeline pigging project.Can you recommend a very strong company.The details of the scope of work is as follows:


Scope Description

The scope of this Tender includes the provision of Intelligent Pigging inspection Services for all piggable pipelines and Flow lines using High Resolution Multi Flux leakage (HRMFL) technique and Ultrasonic (UT) technique

Technical Requirements

1.should have minimum 10 years of experience in Pipeline inline pigging inspection using one or both techniques.

2.should have the required in line pigging inspection tools using High Resolution Multi Flux leakage (HRMFL) technique for the range of 6’’ to 48’’.

3. should have the required in line pigging inspection tools using Ultrasonic technique for the range of 6’’ to 42’’.

4. should have minimum of 2, level 3 data analysis engineers with minimum of 5 years’ experience in the same field.

5. should have an approved Quality Manual, ISO 9001 or equivalent quality management system for at least 5 years and QA/QC department.

6. should have an existing Inline pigging inspection contract with reputable Oil and Gas Company.

With best regards,


Ummer Koya

Executive Director
______________________________________________
Sheida International Co. LLC
Sheida Consultants
Board: (+968) 95073478 / 97306011
Mobile: (+968) 99411741
PB 959, PC 116. Sultanate of Oman
www.sheidainternational.com, www.sdi-sheida.com
www.sheidaconsult.com
______________________________________________


 
 Reply 
 
Yevgeniy Reshetov
Yevgeniy Reshetov
14:48 Nov-11-2012
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
In Reply to ummerkoya at 11:15 Jun-12-2012 .

Download LIN_SCAN Profile

Dear Sir,

Our company LIN SCAN is based in United Arab Emirates, and it is the leading pipeline ispection provider in the Middle East, Indian subcontinent, South East Asia, North Africa, former USSR countries, and have a couple of projects in France. We do manufacture of complete pipeline inspection equipment for pipeline sizes from 6" to 56". Scope of our services includes Cleaning & Gauging Pigging, Caliper/Geometry ispection, Metal Loss Inspection using magnetic techniques (MFL & TFI) and ultrasonic techniques (UT & UT crawler). We have multinational team which includes large number of Indian Nationals.
So LIN SCAN is the best solution for your project.

Best regards,

Yevgeniy Reshetov
LIN SCAN Advanced Pipeline & Tank Services
+77024600151
 
 Reply 
 
kay
kay
20:39 Jul-30-2015
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
In Reply to thomas powers at 04:57 Jul-16-2002 .

We are looking for IG(pig) .Where are you based as your fone no. does not show any country code.
Thanks,

Kay

 
 Reply 
 
Oleg Arefyeff
Oleg Arefyeff
11:23 Sep-01-2015
Re: Looking for Companies using intelligent tool (PIG) for pipe inspection
In Reply to kay at 20:39 Jul-30-2015 .

Hello Kay,

Our company LINSCAN is providing the services using the following technology:

Cleaning
Gauging
Caliper (Electronic Geometry)
MFL (Magnetic flux leakage)
TFI (Transverse Field Inspection)
UT (Ultrasonic Testing)

Wide variety of the Combo Tools
________________________________
Oleg Arefyeff
Business Development Manager

E: oarefyeff@linscaninspection.com
www.linscaninspection.com

 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

VOGT Ultrasonics awarded innovation champion

Let go of the old and try something new. VOGT convinced the jury in the 27th round of the TOP 100
...
innovation competition. Our team is very pleased to officially belong to the TOP 100 in Germany!
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window