where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
426 views
Technical Discussions
Safiye Nihan ERTURK
Safiye Nihan ERTURK
05:25 Jan-25-1999
US testing of wood

Hi,
Can anybody tell me where I can purchase US testing
equipment for in situ nondestructive evaluation of
wooden structural elements in buildings?
I'd like to know if low frequency transducers with
conical heads specially designed for use on wood,
like the type mentioned in the paper by Sandoz
(10th International Symp on NDT of Wood, Lausanne,
1996) are available in the market.
Any information on US NDT of wooden structures
and anyone interested in sharing experience on the
subject is also welcome.
Best regards,
Nihan



 
 Reply 
 
John McCanna
John McCanna
01:12 Jan-27-1999
Re: US testing of wood
: Hi,
: Can anybody tell me where I can purchase US testing
: equipment for in situ nondestructive evaluation of
: wooden structural elements in buildings?
: I'd like to know if low frequency transducers with
: conical heads specially designed for use on wood,
: like the type mentioned in the paper by Sandoz
: (10th International Symp on NDT of Wood, Lausanne,
: 1996) are available in the market.
: Any information on US NDT of wooden structures
: and anyone interested in sharing experience on the
: subject is also welcome.
: Best regards,
: Nihan

Good Evening Nihan

I contacted you earlier providing partial information.
You can contact Mr. Jeff DeWalt at CANDET, 124 Skyway Avenue,
Rexdale, Ontario, Canada M9W 4Y9 Phone: (416) 213-8000,
Fax: (416) 213-8004.

I believe they also have a web site. Try www.candet.com
or www.candet.ca

Good luck

John McCanna


 
 Reply 
 
Andrew Holuszko
Andrew Holuszko
09:59 Jan-30-1999
Re: US testing of wood
Dear Sir,
We are selling a commercial equipment which could be used for the wood testing.
The CT-3 Concrete/Material Tester; it is a handheld, battery powered tester working in about 40 kHz to 4 MHz frequency range, up to 600 V output. It displays the TOF between the probes. Unit works with the variety of custom probes including the conical head probes. The unit is manufactured by Unipan.
Please contact me for more details.
Regards,

Andrew Holuszko/Western NDE & Engineering Ltd.
Vancouver, BC, Canada





 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window