where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
306 views
Technical Discussions
Chris Coughlin
Chris Coughlin
04:00 Oct-03-2003
RFI: ET of carbon-carbon composites

Hi Folks,

NTIAC is reviewing the state of the art in eddy current testing of carbon-carbon composites. We are seeking all relevant knowledge about this topic, and would welcome any input. Please contact NTIAC at info@ntiac.com or (800) 684-2239.

Thanks in advance,
Chris



 
 Reply 
 
Paul Stone
Paul Stone
01:21 Nov-27-2003
Re: RFI: ET of carbon-carbon composites
I am studying at the University of Derby for my Beng in Mechanical Manufacture. The subject of my final year dissertation is depth measurement of silicone carbide fibbers in titanium metal matrix composites using eddy currents. Do you know of any one or any where that is measuring the depth of fibres in TiMMC using eddy currents?

----------- Start Original Message -----------
: Hi Folks,
: NTIAC is reviewing the state of the art in eddy current testing of carbon-carbon composites. We are seeking all relevant knowledge about this topic, and would welcome any input. Please contact NTIAC at info@ntiac.com or (800) 684-2239.
: Thanks in advance,
: Chris
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window