where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

558 views
Technical Discussions
ozan yurdugül
ozan yurdugül
05:51 Nov-24-1998
looking for a job

I'm a naval architect and UT 1 operator. I can work in a thickness measurement company.
If you interest, send me e-mail.
Best regards.


 
 Reply 
 
RAJESH TRIVEDI
RAJESH TRIVEDI
07:47 Feb-01-1999
Re: looking for a job
DEAR SIR,
I AM SEEKING FOR NDT JOB EITHER IN AIRLINES/
INDUSTRY.I AM GRADUATE IN AERONAUTICAL ENGG.I HAVE ALSO
PASSED ASNT LEVEL-2 IN UT,MT,PT AS PER SNT-TC-1A.
I HAVE A PASSED TOTAL QUALITY MANAGEMENT&ISO 9000.
I HAVE 3YEARS EXPERIENCE IN THE FIELD OF NDT.



 
 Reply 
 
sam soo kang
sam soo kang
00:02 Jan-19-2000
Re: looking for a job
: I'm a naval architect and UT 1 operator. I can work in a thickness measurement company.
: If you interest, send me e-mail.
: Best regards.




 
 Reply 
 
sandip ghadge
sandip ghadge
03:07 Mar-23-2001
Re: looking for a job
: DEAR SIR,
: I have passed Aeronautical Engg. and I am looking for job. So send me job prospects.
kindly look my appplication.

Yours Sincerely
s ghadge


 
 Reply 
 
Larry Smithe
Larry Smithe
08:55 Jul-16-2001
Architect Jobs and Work at Home

These message boards have been a huge help to me in the past, so it would be honest of me to post something on this message board to help someone else along that has happened to see this message. I found two great sites related to home work (engineering, architect, translators, typing jobs, etc) at www.homeworkers.org and www.homeworkers.com . This is a great place to start your search for any "at home jobs". From those great sites i found www.telecommuting-jobs.org and www.intlhomeworkers.com where you will find web design data entry, secretarial, word processing, desktop publishing, medical transcription, proofreading and translating jobs. Each site has free trial membership!

From, Larry Smithe
larrysmithe2001@yahoo.ca



 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window