where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1132 views
Technical Discussions
mark tomlinson
mark tomlinson
00:58 Nov-16-2003
Help! - c-scan test panel

I am currently doing a BEng in mechanical engineering and in my second year have decided to reasearch C-Scan and create a test panel. This reasearch will be continued into my third year therefore it is necessary that I do everything correctly now.

I have no experience at all of NDT or Ultrasonics.

Can any body enlighten me in simple terms what can test panels can do exactly and what is the difference to a-scan and c-scan?

Any other information on these topics would be much appreciated.

Regards
Mark


 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 159

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
159
02:50 Nov-16-2003
Re: Help! - c-scan test panel
Hi Mark,
Check out the Krautkramer website go to www.agfandt.com and then click on the Krautkramer Ultrasonics Systems section. The next page you see is all about Ultrasonic testing. At the bottom of the page is a booklet "Introduction to Basic Principles of Ultrasonic Non-destruction Testing". You can download it or they will send you a copy it is about 2.5MB. On the same page you can also get a copy of the Echo 39 magazine on pages 40-43 there are two articles on Cscan presentation and associated equipment. From pages 33-39 there are articles on various Ultrasonic flaw detectors with Ascan presentation.
Hope this sets you off in the right direction for your research.
Regards
Neil Burleigh


----------- Start Original Message -----------
: I am currently doing a BEng in mechanical engineering and in my second year have decided to reasearch C-Scan and create a test panel. This reasearch will be continued into my third year therefore it is necessary that I do everything correctly now.
: I have no experience at all of NDT or Ultrasonics.
: Can any body enlighten me in simple terms what can test panels can do exactly and what is the difference to a-scan and c-scan?
: Any other information on these topics would be much appreciated.
: Regards
: Mark
------------ End Original Message ------------




 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 617

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
617
07:09 Nov-17-2003
Re: Help! - c-scan test panel
In this month's issue you can find a video presentation of C-scan:
www.ndt.net/article/v08n11/passi2/passi2.htm

In the UT Encyclopedia you find description of:
A-scan: www.ndt.net/article/az/ut/asc.htm
C-scan: www.ndt.net/article/az/ut/csc.htm


----------- Start Original Message -----------
: I am currently doing a BEng in mechanical engineering and in my second year have decided to reasearch C-Scan and create a test panel. This reasearch will be continued into my third year therefore it is necessary that I do everything correctly now.
: I have no experience at all of NDT or Ultrasonics.
: Can any body enlighten me in simple terms what can test panels can do exactly and what is the difference to a-scan and c-scan?
: Any other information on these topics would be much appreciated.
: Regards
: Mark
------------ End Original Message ------------




 
 Reply 
 
David LAVASTRE
Engineering,
EDF CEIDRE, France, Joined Nov 2003, 11

David LAVASTRE

Engineering,
EDF CEIDRE,
France,
Joined Nov 2003
11
04:50 Nov-18-2003
Re: Help! - c-scan test panel
Mark,
You can find interesting informations about Ultrasonic testing (and other testing methods...) at

http://www.ndt-ed.org/


also you can find informations about C-Scan systems at :

http://www.aims.nl/
http://www.scanmaster-irt.com/
http://www.gepower.com/businesses/ge_panametrics/en/index.htm
http://www.karldeutsch.de/
http://www.rd-tech.com/
http://www.agfandt.com/

and a page about the history of C-Scan...(the first C-Scan in the world ;) )
http://www.uxr.com/webpg9.htm

David



 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window