where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
365 views
Technical Discussions
M. de Weert
M. de Weert
09:24 May-20-2003
Bearing inspections tools

Dear Madam, Sir,

For general bearing inspection, it is a requirement to use a ball scriber. It looks like a pen, with a small ball on the tip. the ball has a specified diameter. The tool is used to feel, by scribing the tool over the part, if there is any defect on the surface of the bearing.

I do not know, if this is the common name for this tool (it does not show up on search engines), but I am looking for a company that supplies this tool. Giving me the more common name of this tool would also be a great help.

Please inform

Kind regards,
M. de Weert
Repair Engineer
Standard Aero



 
 Reply 
 
Emil MICU
Emil MICU
01:24 Dec-01-2003
Re: Bearing inspections tools
: Dear Madam, Sir,
.
: For general bearing inspection, it is a requirement to use a ball scriber. It looks like a pen, with a small ball on the tip. the ball has a specified diameter. The tool is used to feel, by scribing the tool over the part, if there is any defect on the surface of the bearing.
.
: I do not know, if this is the common name for this tool (it does not show up on search engines), but I am looking for a company that supplies this tool. Giving me the more common name of this tool would also be a great help.
.
: Please inform
.
: Kind regards,
: Radu MICU
: Service Manager
: KALTECO Marine
.



 
 Reply 
 
W. Mariacher
W. Mariacher
06:41 Dec-14-2004
Angebot
Sehr geehrter Herr Micu,

leider können wir mit den Preisen pro / kg nicht verwenden. (siehe Anhang). bitte teilen sie uns den komplett Preis mit.

Vielen Dank

W. Mariacher

Sehr geeherte Herren,

Wir haben unsere Preise fuer die von Ihnen nachgefragten Produkte kalkuliert und fuer Sie ein Angebot zusammengefasst:

1. Preis fuer die C1238082 Grundplatte - 2 EURO/Kg.
2. Preis fuer das B1032199 Pumpengeheuse - 3,8 EURO/Kg.
3. Preis fuer das B1246418 Tauchrohr - 3,25 EURO/Kg.
4. Preis fuer die Sandstrahlreinigung, Grundierung und Bemalung - 0,55 EURO/Kg.

Wir warten auf eine Antwort von Ihnen,

Mit freundlichen Gruessen,
Radu Micu.



 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window