where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON Copenhagen
YXLON Copenhagen is a highly specialized, award winning Danish company with 60 years of experience in portable X-ray solutions for industrial NDT.
1714 views
Technical Discussions
sandeep jaikishen
sandeep jaikishen
07:02 Jan-01-2004
Leakage of LPG cylinders

Hi

Sometimes we find LPG cylinders leaking around the circumferential weld during first filling at LPG bottling plants. Cylinders then sent to labs for failure analaysis. They carry out the leakage test with water and Pneumatic pressure. Most of the times, they could not establish any leakage from the same cylinders.

Why it happens and is their any better method, by which we can establish the leakage.



    
 
 Reply 
 
N.Kuppusamy
Consultant, NDT Level-III Engineer
Advanced Inspection & Testing (S) Pte Ltd, Singapore, Joined Dec 2003, 34

N.Kuppusamy

Consultant, NDT Level-III Engineer
Advanced Inspection & Testing (S) Pte Ltd,
Singapore,
Joined Dec 2003
34
00:25 Jan-02-2004
Re: Leakage of LPG cylinders
Hello,

Happy New Year to every body. You can advise your lab to perform hologen leak testing or Mass Spectrometer Test. These leak testings are more sensitive than others.

Regards,
N.Kuppusamy

----------- Start Original Message -----------
: Hi
: Sometimes we find LPG cylinders leaking around the circumferential weld during first filling at LPG bottling plants. Cylinders then sent to labs for failure analaysis. They carry out the leakage test with water and Pneumatic pressure. Most of the times, they could not establish any leakage from the same cylinders.
: Why it happens and is their any better method, by which we can establish the leakage.
------------ End Original Message ------------




    
 
 Reply 
 
Mike
NDT Inspector
Materiaal Metingen Holland, Netherlands, Joined Oct 1999, 2

Mike

NDT Inspector
Materiaal Metingen Holland,
Netherlands,
Joined Oct 1999
2
04:59 Jan-03-2004
Re: Leakage of LPG cylinders
----------- Start Original Message -----------
: Hi
: Sometimes we find LPG cylinders leaking around the circumferential weld during first filling at LPG bottling plants. Cylinders then sent to labs for failure analaysis. They carry out the leakage test with water and Pneumatic pressure. Most of the times, they could not establish any leakage from the same cylinders.
: Why it happens and is their any better method, by which we can establish the leakage.
------------ End Original Message ------------


You could try a dye penetrant test on the weld and surrounding area. This would probably be the cheapest option and quite easy. Any paint would have to be removed first.



    
 
 Reply 
 
Suleyman Halicioglu
Suleyman Halicioglu
08:00 Jan-05-2004
Re: Leakage of LPG cylinders
----------- Start Original Message -----------
: : Hi
: : Sometimes we find LPG cylinders leaking around the circumferential weld during first filling at LPG bottling plants. Cylinders then sent to labs for failure analaysis. They carry out the leakage test with water and Pneumatic pressure. Most of the times, they could not establish any leakage from the same cylinders.
: : Why it happens and is their any better method, by which we can establish the leakage.
:
: You could try a dye penetrant test on the weld and surrounding area. This would probably be the cheapest option and quite easy. Any paint would have to be removed first.
------------ End Original Message ------------

You should clean the weld and HAZ by brush or similar method and try a magnetic particle test, by yoke or prod type. You should perform the pneumatic test under water.


    
 
 Reply 
 
ALBERTO MONICI
Engineering, Leak Detection Service - Thermography Service -
ETS Sistemi Industriali, Italy, Joined Aug 2002, 17

ALBERTO MONICI

Engineering, Leak Detection Service - Thermography Service -
ETS Sistemi Industriali,
Italy,
Joined Aug 2002
17
00:06 Jan-05-2004
Re: Leakage of LPG cylinders
Hi, and Happy New Year to everybody!
The Pneumatic and Water Leak Test are able to find gross leak (more than 1*10-3 std cc/sec, in normal industrial labs application). For Leak below this value, you can find a pressure decreases but it is very difficult to localize the leak.
Also I suggest you to use Leak Detector in sniffer mode. I suggest to utilise Helium Leak Detector because Helium is a Noble Gas. More normatives (ASNT or EN) permit you to certify also the quantity of leaks with personnel qualified II level or more.
Our company furnish consultancy, automatic systems and services for Leak Test.
Alberto Monici
ETS Sistemi Industriali
Italy
----------- Start Original Message -----------
: Hello,
: Happy New Year to every body. You can advise your lab to perform hologen leak testing or Mass Spectrometer Test. These leak testings are more sensitive than others.
: Regards,
: N.Kuppusamy
:
: : Hi
: : Sometimes we find LPG cylinders leaking around the circumferential weld during first filling at LPG bottling plants. Cylinders then sent to labs for failure analaysis. They carry out the leakage test with water and Pneumatic pressure. Most of the times, they could not establish any leakage from the same cylinders.
: : Why it happens and is their any better method, by which we can establish the leakage.
------------ End Original Message ------------





    
 
 Reply 
 
HaccpMTC grp
HaccpMTC grp
08:00 Aug-09-2004
Re: Leakage of LPG cylinders
hi to every body

we are looking for the test system used to test the lpg cylinders e.g hydrostatic test system,ultrasonic test system ,corrossion test system and the valve test system.
looking for cooperation

Atif A.G.othman
g.director



    
 
 Reply 
 

Product Spotlight

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window