where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Acoustic Emission Consulting, Inc.
Acoustic Emission Consulting, Inc. specializes in the design of small portable AE instruments for field and lab use.
456 views
Technical Discussions
BOUAZIZ Kais
BOUAZIZ Kais
06:29 Jan-07-2004
Magnetic particle testing


Hi,

My question is if we can detect the near-surface defects by magnetizing by yokes, if it is possible, what is the maximum thikness that we can controle.
The difference between the yoke magnetizing technic and the universal bunchs


    
 
 Reply 
 
Bruce Owen
Sales, Manufacturing
Lectromax Australia Pty Ltd, Australia, Joined Aug 2001, 2

Bruce Owen

Sales, Manufacturing
Lectromax Australia Pty Ltd,
Australia,
Joined Aug 2001
2
02:46 Jan-07-2004
Re: Magnetic particle testing
Hi Kais,
Before i attempt to give you an answer, what exactly do you mean "what is the maximum thickness that we can control" also, "the universal bunchs".
regards, Bruce.


    
 
 Reply 
 
BOUAZIZ KAIS
BOUAZIZ KAIS
09:15 Jan-08-2004
Re:Re: Magnetic particle testing
----------- Start Original Message -----------
: Hi Kais,
: Before i attempt to give you an answer, what exactly do you mean "what is the maximum thickness that we can control" also, "the universal bunchs".
: regards, Bruce.
------------ End Original Message ------------


"the maximum thickness" is the mesurement of the penetration of the magnetic fields in the part that we test,and "Universal bunchs" is the "direct contact magnetization through Head/Tailstock".
Best regards
Kais BOUAZIZ.



    
 
 Reply 
 
swapnil anjikar
swapnil anjikar
02:38 Sep-01-2004
Re: want a problem on Magnetic particle testing
respected sir
i am the student , studing in master degree in advanced manufacturing process , i am intrested in magnetic partical ins. tech . i done lots of litrature survy in this tech, i want a project in this tech. for my fullfillment of master degree . so pls help me , pls suggest me the problem in this tech. so i concentrate on that . took as my project
yous faithfully
swapnil d anjikar


    
 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window