where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

709 views
Technical Discussions
Kent
Student, -
UA, USA, Joined Jul 2003, 2

Kent

Student, -
UA,
USA,
Joined Jul 2003
2
00:15 Jan-12-2004
High frequency vibration exciter

I want to use a vibration shaker to excite a steel sheet up to 100kHz. Is it possible?
Anyboday has such experience?


 
 Reply 
 
Ethan
Ethan
04:08 Jan-12-2004
Re: High frequency vibration exciter
----------- Start Original Message -----------
: I want to use a vibration shaker to excite a steel sheet up to 100kHz. Is it possible?
: Anyboday has such experience?
------------ End Original Message ------------


Anything is possible! What is your goal for exciting the sheet? You could think about plate waves. Where the thickness of the steel sheet is close to the wavelength of 100 KHz in your steel. Or if you have a given sheet, calculate back to the frequency required to induce a plate wave.

Depending on how much energy is required would determine which vendor's product is best suited for your application

regards
e


 
 Reply 
 
Kent
Student, -
UA, USA, Joined Jul 2003, 2

Kent

Student, -
UA,
USA,
Joined Jul 2003
2
07:17 Jan-12-2004
Re: High frequency vibration exciter
E, thank you for your answer. It's good news for me. I just want to excite the structure to such high frequency and measure the vibration energy on that frequency band. since the sheet is small (1"X8"X1/16") and I guess the energy should be little.
Would you suggest some products/vendors?

----------- Start Original Message -----------
: : I want to use a vibration shaker to excite a steel sheet up to 100kHz. Is it possible?
: : Anyboday has such experience?
:
: Anything is possible! What is your goal for exciting the sheet? You could think about plate waves. Where the thickness of the steel sheet is close to the wavelength of 100 KHz in your steel. Or if you have a given sheet, calculate back to the frequency required to induce a plate wave.
: Depending on how much energy is required would determine which vendor's product is best suited for your application
: regards
: e
------------ End Original Message ------------




 
 Reply 
 
tan chee siong
tan chee siong
00:35 Aug-08-2005
Mini Vibration exciter
Hello!I wish to develop a mini vibration exciter which generate around 5 Newton. This shaker will be placed at the shaft bearing of a 2 stroke motorcycle engine. Purpose of this project is to do the vibration analysis of the 2stroke engine by eliminate the vibration due to the combustion inside the engine itself.




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window