where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1172 views
Technical Discussions
Oleksandr Pogorielov
R & D,
sas BT2i , NDT Senior Advisor, Ukraine, Joined Dec 2010, 29

Oleksandr Pogorielov

R & D,
sas BT2i , NDT Senior Advisor,
Ukraine,
Joined Dec 2010
29
11:59 Mar-14-2016
Repairs USN52R

Hello!

Who have experience in repair of USN52R?
The devices age is 16 year. He has problem in the software of device.

Thanks for your answer

    
 
 Reply 
 
Christoph Schnitger
Christoph Schnitger
12:29 Mar-14-2016
Re: Repairs USN52R
In Reply to Oleksandr Pogorielov at 11:59 Mar-14-2016 (Opening).

Hello Oleksandr,

we have a lot of experience with these old equipment and also a lot of spare
parts, boards and screen on stock; - here in Germany.

Software may causes problems but normaly we can fit this also !

Christoph

    
 
 Reply 
 
Oleksandr Pogorielov
R & D,
sas BT2i , NDT Senior Advisor, Ukraine, Joined Dec 2010, 29

Oleksandr Pogorielov

R & D,
sas BT2i , NDT Senior Advisor,
Ukraine,
Joined Dec 2010
29
19:47 Mar-17-2016
Re: Repairs USN52R
In Reply to Christoph Schnitger at 12:29 Mar-14-2016 .

Hello, Christoph.

Thanks for the information. It's very nice when there is one to turn to for help

    
 
 Reply 
 
Juergen von der Weser
Engineering, R&D, teacher - now retired
retired from NDT group of biggest European Airframe Maker , Germany, Joined Jul 2011, 10

Juergen von der Weser

Engineering, R&D, teacher - now retired
retired from NDT group of biggest European Airframe Maker ,
Germany,
Joined Jul 2011
10
14:24 Mar-21-2016
Re: Repairs USN52R
In Reply to Oleksandr Pogorielov at 19:47 Mar-17-2016 .

I don't know if this helps but 30 years ago with the first digital Krautkramer Instruements, the time we programmed for USD10 this was our last solution to get the System back on track:
Use the command "ICECOLD" to input via RS232 interface as a codeword for complete reset of the system. That may be a way to reset the system after you killed it via strange software commands.
Krautkramer kept a Long time the RS232 command set for the whole family of digital Equipment.

1    
 
 Reply 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window