where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1188 views
Technical Discussions
Mir
Mir
18:23 Apr-07-2016
Rapid dB drop technique

During the PAUT study, I found the rapid dB drop technique (PAUT length sizing technique)sizing technique on Olympus webinar.

what is the rapid dB drop technique ?

 
 Reply 
 
Paul Holloway
Consultant,
Holloway NDT & Engineering Inc , Canada, Joined Apr 2010, 242

Paul Holloway

Consultant,
Holloway NDT & Engineering Inc ,
Canada,
Joined Apr 2010
242
19:08 Apr-07-2016
Re: Rapid dB drop technique
In Reply to Mir at 18:23 Apr-07-2016 (Opening).

Mir,

A simple Google search would have yielded you the following:

http://www.slideshare.net/OlympusIMS/omnipc-flaw-sizing-demo-35926077

1
 
 Reply 
 
Mir
NDT Inspector,
South Korea, Joined Apr 2016, 1

Mir

NDT Inspector,
South Korea,
Joined Apr 2016
1
19:40 Apr-07-2016
Re: Rapid dB drop technique
In Reply to Paul Holloway at 19:08 Apr-07-2016 .

Thanks for your information.

How can you apply the rapid dB drop technique?
can you give me the detail informations?

 
 Reply 
 
Daniel Braun
Daniel Braun
07:31 Apr-12-2016
Re: Rapid dB drop technique
In Reply to Mir at 19:40 Apr-07-2016 .

"Rapid dB Drop Technique" is just another new name for the technique, which is known since more than 50 years ago. Actually you may read the book for the Level I operators http://www.ndt.net/article/v05n09/berke/berke.pdf - chapter 6 related to the defects evaluation. In case of having the recorded A-Scans some dB drop for the defect sizing is implementable easily in the postprocessing software for every discontinuity recognized by the software - every state of the art PA instrument is equipped with this function, may be just the name of the function is different from one brand to another. However - with reference to the above book - this technique has a limitation - it may not be applied to the compact defects, which have the dimensions smaller than the beam width - in that case it is necessary to refer to the echo amplitude

 
 Reply 
 

Product Spotlight

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window