where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

452 views
Technical Discussions
William Blum
William Blum
01:08 Jan-31-2004
UT Thickness Gauging Software

Can anyone help with the above. I would like to find a program that will talk to any UT thickness gauge.



 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
08:53 Feb-01-2004
Re: UT Thickness Gauging Software
The majority of UT thickness gauges sold have no computer interface capability. - I can't speak for other manufacturers, but I would guess we sell at least 10 that can't for every one that does - It is not a feature that most people are willing to pay for.

As far as I am aware there are no general purpose programs available, In principle there is no reason why a 'multi-vendor' software package shouldn't be written, the protocols are fairly simple, and I think everyone documents them. but normally when you buy a data-logging thickness gauge you get the necessary software to transfer the data to a standard spreadsheet package such as excel, so I doubt if the market would be large.

Rgds
Joe

----------- Start Original Message -----------
: Can anyone help with the above. I would like to find a program that will talk to any UT thickness gauge.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window