where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

694 views
Technical Discussions
Dale Thorpe
Dale Thorpe
05:33 Feb-20-1999
Immersion Tank - Rust Control

We are a high volume inspection company examining automotive air bag components using robitic immersion (UT) techniques. The industry is quickly moving from aluminum to steel components.

I would appreciate any information or suggestions on a water based additive for raw uncoated steel for the immersion tanks that does not leave any oily residue or foaming properties and of course, environmental friendly.

Dale Thorpe
Advanced Material Solutions, Inc.


 
 Reply 
 
Tom Colter
Engineering,
Bechtel Plant Machinery Inc., USA, Joined Nov 1998, 3

Tom Colter

Engineering,
Bechtel Plant Machinery Inc.,
USA,
Joined Nov 1998
3
03:11 Feb-21-1999
Re: Immersion Tank - Rust Control
: We are a high volume inspection company examining automotive air bag components using robitic immersion (UT) techniques. The industry is quickly moving from aluminum to steel components.

: I would appreciate any information or suggestions on a water based additive for raw uncoated steel for the immersion tanks that does not leave any oily residue or foaming properties and of course, environmental friendly.

We have had good results using immersion tank additives from Sonotech, Inc.
http://www.sonotech-inc.com/


: Dale Thorpe
: Advanced Material Solutions, Inc.




 
 Reply 
 
Robert A. Day
Engineering
Milky Way Jewels, USA, Joined Nov 1998, 40

Robert A. Day

Engineering
Milky Way Jewels,
USA,
Joined Nov 1998
40
09:13 Feb-22-1999
Re: Immersion Tank - Rust Control
is quickly moving from aluminum to steel components.

: I would appreciate any information or suggestions on a water based additive for raw uncoated steel for the immersion tanks that does not leave any oily residue or foaming properties and of course, environmental friendly.

: Dale Thorpe
: Advanced Material Solutions, Inc.




 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window