where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments
1624 views
Technical Discussions
Don
Don
06:58 Mar-04-2004
Calculation of velocity of surface waves

Does anybody know the equation for calculating the surface (Rayleigh) wave velocity, given the material properties, modulus of elasticity, poisson's ratio density etc?

I have seen rough calculation as 0.92*ShearVelocity, and a more accurate result using a calculator at www.eng.vt.edu/fluids/msc/jscalc/wscac02.htm but do not know the equations hidden inside it. Any ideas, Don



 
 Reply 
 
Paul A. Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul A. Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
02:55 Mar-04-2004
Re: Calculation of velocity of surface waves
In ULTRASONIC WAVES IN SOLID MEDIA, Joseph Rose references an approximate solution by Viktorov. The ratio of the surface wave speed to the shear wave speed (Cr/Ct)= (0.87 + 1.12*nu)/(1+nu) where nu is Poisson's ratio. For nu = 0.29 the ratio is 0.92 as you stated.
Paul


----------- Start Original Message -----------
: Does anybody know the equation for calculating the surface (Rayleigh) wave velocity, given the material properties, modulus of elasticity, poisson's ratio density etc?
: I have seen rough calculation as 0.92*ShearVelocity, and a more accurate result using a calculator at www.eng.vt.edu/fluids/msc/jscalc/wscac02.htm but do not know the equations hidden inside it. Any ideas, Don
:
------------ End Original Message ------------




 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
00:51 Mar-05-2004
Re: Calculation of velocity of surface waves
----------- Start Original Message -----------
: Does anybody know the equation for calculating the surface (Rayleigh) wave velocity, given the material properties, modulus of elasticity, poisson's ratio density etc?
: I have seen rough calculation as 0.92*ShearVelocity, and a more accurate result using a calculator at www.eng.vt.edu/fluids/msc/jscalc/wscac02.htm but do not know the equations hidden inside it. Any ideas, Don
:
------------ End Original Message ------------

Don,
There is a formula for the calculation of velocity of surface waves given on pg 22 of "The Krautkramer Booklet" (The blue book)It looks like it is the same formula as the one that Paul Meyer offered but it has not presented as a ratio. If you don't have a "blue" book contact your local Krautkramer Rep.

Regards
Neil Burleigh
P.S. The blue book now has a white cover.


 
 Reply 
 

Product Spotlight

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window